Ricoh 340 manual Specifying an End Receiver, Group Dial, Quick Dial, Speed Dial

ADVANCED TRANSMISSION FEATURES

The following display is shown.

Note

❖Group Dial

Enter{q } , {p}, {p} followed by the Group number (2 digits). For example, to choose the number

stored in Group 04 in the Transfer Station, enter:{q } {p} {p} {0

}{4}

❒The numbers of Transfer Sta- tions and End Receivers are dis- played.

I Press the {Start} key.

4Specifying an End Receiver

When you make a Transfer Request, you must specify the final destina- tions (End Receivers) for your mes- sage.

You cannot enter the numbers of the End Receivers directly. Instead, enter a simple code that describes where the numbers are stored in the Trans- fer Station (in Quick Dials, Speed Di- als or Groups).

The numbers must first have been stored in Quick Dials, Speed Dials or Groups in the Transfer Station(s).

❖Quick Dial

Enter {q } followed by the num- ber (2 digits) of the Quick Dial where the End Receiver is stored.

For example, to choose the number

stored in Quick Dial 01 in the Transfer Station, enter: {q } {0} {1}

❖Speed Dial

Enter {q }, {p} followed by the Speed Dial code (2 or 3 digits). For example, to choose the number

stored in Speed Dial 12 in the Transfer Station, enter:{q } {p} {1} {2}

98