Ricoh 340 manual Press the Clear/Stop key, Press the No key, Press the Yes key

SORT/STACK/STAPLE

When setting a stack of originals in the document feeder

A Set a stack of originals in the document feeder, then press the {Start} key.

After all the originals are scanned, the copies are deliv- ered to the tray.

Note

❒The last page should be on the bottom.

When setting an original on the exposure glass or in the document feeder

Reference

See ⇒ P.33 “SADF mode”

A Set the original, then press the {Start} key.

Note

❒Start with the first page to be copied.

B Set the next original, then press the {Start} key.

Note

❒Set the original in the same direction as the first one.

C After all originals are scanned, press the {#} key.

The copies are delivered to the tray.

To stop scanning

When you are using the Sort, Stack, or Staple function, the originals are scanned into memory.

A Press the {Clear/Stop} key.

To resume scanning

A Press the [No] key.

Scanning is resumed.

2

ND2C0103

Note

❒Scanned images in memory are not cleared.

To clear scanned images of the originals

A Press the [Yes] key.

Scanning is stopped with the images cleared.

ND2C0104

When memory reaches 0 %

Scanning will be stopped if the size of scanned image data exceeds memory capacity.

Note

❒There is enough memory to store approximate 50 originals of A4 size. (Type 1 requires the optional 8 MB copier memory unit.)

èê