Ricoh 340 manual Enter a Transfer Stations, Press Recv. Stn, Enter one or more End Receivers

TRANSFER REQUEST

C Enter the “Transfer Request” function number with the num- ber keys.

ND1X03E0

Note

❒If the appropriate display is not shown, press [−Prev.] or [↓Next].

D Enter a Transfer Stations and

press [Recv. Stn].

ND1X03E0

Note

❒Enter the fax numbers of the Transfer Stations with either Quick Dials, Speed Dials or the number keys.

❒If you make a mistake, press the {Clear/Stop} key and try again.

❒To cancel the Transfer Request, press[Cancel] . The Transmis- sion Mode menu is shown again.

E Enter one or more End Receivers.

Note

❒You cannot enter the numbers of the End Receivers directly. The numbers must be stored in Quick Dials, Speed Dials or Groups in the Transfer Sta- tion(s). To specify an End Re-

ceiver, use the special format described in ⇒ P.98 “Specifying an End Receiver”.

❒Press [Add RcvStn] if you wish enter more End Receivers.

❒Press < or > to see the End Re-

ceivers already entered. You
	4
can select an End Receiver from

this list and cancel it by pressing the {Clear/Stop} key.

❒To cancel the Transfer Request, press [Cancel].

F When you have specified all the

End Receivers, press [OK].

G If you want to enter an additional

Transfer Station, press [Yes] and repeat steps 4 to 6.

If you press [No], the Transmission Mode menu is shown and a check mark is added to Transfer Request.

H Press [Exit].

ND1X03E0

97