DIALING

Tone

This feature allows a machine con- nected to a pulse dialing line to send tonal signals (for example if you want to use a special service on a tone dial- ing line). When you press the {Tone} key, the machine dials the number us- ing tonal signals.

Limitation

You cannot place a tone before the first digit of a fax number.

Some services may not be available when using the {Tone} key.

Note

A tone is shown as a “ • ” on the display.

-Sending Tonal Signals by ISDN (ISDN Option Required)

You can still send tone signals to a G3 user even if the machine is only con- nected to an ISDN line.

Note

This feature can only be used for Memory or Immediate Transmis- sion. You cannot dial through ISDN using On-hook Dial or Man- ual Dial.

rect your fax message to a particular terminal at the destination.

Limitation

Subaddress can only be used with ISDN.

Note

2

You need to program a User Func-

tion key with the subaddress func- tion. ⇒ P.164 “ASSIGNING USER FUNCTION KEYS”

You can program a subaddress number in a Quick Dial or Speed Dial.

If you want to assign a subaddress to your fax machine, contact your service representative.

A Set your original and select any scan settings you require.

B Select either G4 or G3 (ISDN).

C Dial the fax number with the number keys.

D Press the User Function key ({F1}-{F5}) where the subaddress function has been registered.

nicating

File

 

File

 

De

Start

TX File

 

TEL

 

 

 

Su

Manual RX

Status

 

Mode

 

F1

F2

F3

F4

F5

 

01

02

03

04

05

06

 

 

 

 

 

ND2L04E3

“/” will appear on the display.

Subaddress (ISDN option required)

ISDN allows two or more terminals (such as a facsimile and digital tele- phone) to be connected to a single line. These terminals are identified by their subaddress numbers. If the ter- minals connected to the line at a des- tination are assigned subaddresses, dialing a subaddress allows you to di-

E Enter the destination subaddress with the number keys.

F Press the {Start} key.

45

Page 301
Image 301
Ricoh 340 manual Tone, Sending Tonal Signals by Isdn Isdn Option Required, Subaddress Isdn option required