Ricoh 340 manual COMBINE-COMBINING Originals Into ONE Copy

COMBINE—COMBINING ORIGINALS INTO ONE COPY

❖16 pages→booklet (Type 1 requires the optional 8 MB copier memory unit and duplex unit.)

This mode makes a booklet copy of 16 pages from 16 one-sided origi- nals.

Setting Originals (Originals set in the document feeder)

• Originals reading from left to right

1	2	3	4	1		2	4
					3

Combine5

❒The machine uses ratios in the fol- lowing range:

•Type 1, Type 2

Metric version: 25 – 400 %

Inch version: 25 – 400 %

•Type 3

Metric version: 35 – 400 %

Inch version: 32 – 400 % 2

❒If the calculated ratio is under the minimum ratio, it is corrected within the range of the ratio auto- matically. However, with some ra- tios, parts of the image might not be copied or blank margins appear on copies.

•Originals reading from top to bot- tom

1	2	3	4	2	1
				4	3
					Combine6

Limitation

❒ You cannot use this function in Duplex mode.

❒ You cannot use the bypass tray with this function.

❒ The machine cannot copy originals different in size and direction.

Note

❒ The number of originals copied (combined) can be 2, 4, 8, or 16.

❒ In this mode, the machine selects the reproduction ratio automati- cally. This reproduction ratio de- pends on the copy paper sizes and the number of originals.

❒Separation line between originals

can be printed with the user tools. See “6. Combine Copy” in⇒ P.157 “2. Adjust Image 2/2”.

❒Even if the direction of originals is different from that of the copy pa-

per, the machine will automatical- ly rotate the image by 90° to make copies properly.

❒You can make copies even if the number of originals is less than the number required in the selected mode. You can also disable this

function with the user tools. See “2. Comb. Auto Eject” in ⇒ P.160 “3. Input/Output 1/2”.

❒When the number of originals placed is less than the number specified for combining, the last page (s) will be copied blank as shown in the illustration.

1	2		1	2
		3
			3

æä