Ricoh 340 manual Starting the Machine, Turning On The Power, Power switches, Operation switch

STARTING THE MACHINE

STARTING THE MACHINE

To start the machine, turn on the op- eration switch.

Note

❒This machine automatically enters Energy Saver mode or turns itself off if you do not use the machine for a while. See “09. Energy Saver Mode”, “10. Auto Off Timer” of the System Settings.

B Turn on the operation switch to	1
make the On indicator light up.

The panel display will come on.

Main

Power

On

top

-Power switches

This machine has two power switch- es: See P.1 “GUIDE TO COMPO-

NENTS”

❖Operation switch

Turn on this switch to activate the machine. When the machine has warmed up, you can make copies or send faxes.

❖Main power switch

Do not touch the main power switch. It should be used only by a service representative when the optional fax unit is installed.

Important

❒If you leave the main power switch off for more than one hour, all files in memory are lost. See “Turning Off The Power” below.

ND1M01E0

Note

❒If nothing happens when you turn on the operation switch, check if the main power switch is turned on.

❒During the warm-up period, you can use the Auto Start func- tion. See “10. Auto Start” of the Copy Reference.

❒Warming-up time is as follows.

•35 copy per minute model : less than 85 seconds

•45 copy per minute model : less than 100 seconds

Turning On The Power

A Make sure that the power cord is plugged into the wall outlet firm- ly and Main Power Switch is on.

7