Ricoh 340 manual Rti/Tti, 193

KEY OPERATOR SETTINGS

C❖ On Hook

Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

ND1X03E6

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

G Adjust the volume using the < or

>key and press [OK].

ND1X03E5

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Monitor Volume” using the number keys.

F Select an item you want to adjust pressing [−Prev.] and [↓Next].

Note

❒On Hook, Transmission, Recep- tion, Dialling, and Printing are shown in that order.

Note
❒ When you press [Cancel], the	7
volume setting is canceled and

the display shown in 5 appears again.

❒Lowest = OFF

H Press [PrevMenu].

I Press the {User Tools/Counter} key.

RTI/TTI

An RTI (Receive Terminal Identifica- tion) is passed to a receiver or sender when you send or receive a fax. When the RTI is received, it is shown on the display and printed in a report at the other end.

The TTI (Transmitter Terminal Identi- fication) is printed on the header of every fax you send.

You usually should contain your name in both of these identifications.

193