Ricoh 340 manual Reception Functions, Transfer Station, Requesting Party, End Receiver

RECEIVING A FAX MESSAGE

RECEPTION FUNCTIONS

Transfer Station

Transfer Stations allow you to expand the standard features of your fax ma- chine to set up complex networks. Transfer Stations must be machines of the same make.

3 The diagram below may make the concept clearer.

	End Receiver
Requesting Transfer station
party	End Receiver
Transfer	End Receiver
result report
	ND1X00E4

Limitation

❒Polling ID's of the Requesting Par- ty and Transfer Station must be identical for this feature to work.

❒This machine will not receive a Transfer Request unless it has enough free memory to store two or more destinations dialed from the number keys.

❒If the Requesting Party specifies a Group for the End Receivers and the total number of End Receivers exceeds 200, the Transfer Station cannot transfer the message and sends a Transfer Result Report to the Requesting Party.

Reference

P.96 “TRANSFER REQUEST”

The following terminology is used in this section.

❖Requesting Party

The machine where the message originates from, i.e. the machine making a Transfer Request.

❖Transfer Station

The machine that forwards the in- coming message to another desti- nation, i.e. the machine that receives the Transfer Request. In this section this refers to your ma- chine.

❖End Receiver

The final destination of the mes- sage, i.e. the machine that the Transfer Station sends to. End Re- ceivers must be programmed into Quick Dials, Speed Dials or Groups in the Transfer Station (this machine).

-Multi-step Transfer

The principles of Transfer Stations can be used to build up a multi-step facsimile network where messages are passed through several Transfer Stations. By programming the end re- ceivers in a Transfer Station Group, you can enable this machine to trans- fer messages onto other Transfer Sta- tions.

For more information, contact your service representative.

This feature can only be used if the machines are made by the same mak- er.

Note

❒The optional Fax Feature Expand- er is required for this function.

60