Ricoh 340 manual Entering and Modifying Text, Available Characters, Keys

8. Entering Text

ENTERING AND MODIFYING TEXT

This section describes how to enter characters. When you enter a charac- ter, it is shown at the position of the cursor. If there is a character at the cursor position, the entered character is shown before the character.

Available Characters

•Alphabetic characters

ABCDEFGHIJKLMNOPQRSTU- VWXYZabcdefghijklmnopqrstu- vwxyz

•Symbols

•Numerals 0123456789

Keys

❖Number keys

Use to enter numbers.

❖< and >

Use to move the cursor left or right.

❖{Insert} key

Press if you wish to insert charac- ters.

Note

❒If you wish to enter symbols, use the [Symbols] key.

ND2C0102

❒Flip the plate to access Quick Dial keys not shown.

❒Quick Dial 01/29 means Quick Dial key 01 or 29.

❖Quick Dial 01/29 to Quick Dial 28/56 (A to Z)

Press these keys to enter upper and lower case letters.

❖[A←→a] key

Use to switch between upper and lower case.

❖Quick Dial 27/55

Press to enter a space.

❖{Clear/Stop} key

Deletes a character at the cursor position. You can delete a charac- ter at the right end of a line even if the cursor is placed to the right of the character.

-Wild Cards

When you register RTIs or CSIs for multiple destinations, you can regis- ter a sequence of characters common to these identifications as a wild card instead of registering every identifi- cation.

If a destination has an RTI or CSI con- taining a wild card, the machine de- termines that the destination matches the registered destination.

213