Ricoh 340 manual Choosing the Area to be Scanned Yourself Irregular Scan Area

ADVANCED TRANSMISSION FEATURES

CHOOSING THE AREA TO BE SCANNED YOURSELF (IRREGULAR SCAN AREA)

Usually the machine automatically detects the size of an original when it is scanned. However, you may wish to override this and choose the area to be scanned yourself.

4	ADF	exposure glass
		ND0X01E3

You can either choose one of the stan- dard paper sizes (A4 KL, B4 L, A3 L, 81/2 × 11" K L, 11" × 17" K) or one of two custom sizes programmed in advance (Area 1 and Area 2). ⇒ P.16 “Paper Size and Scanned Area”

Although you can specify a different scan area for each page when using the exposure glass, only one size is al- lowed when scanning from the Docu- ment Feeder (ADF).

A Set your original and select any scan settings you require.

B Press [Mode].

C Enter the “Irreg. Scan Area” func- tion number with the number keys.

D Press the < or > key to select the paper size.

Note

❒To see which paper sizes have already been programmed, press [Status].

❒To cancel the Irreg. Scan Area, press [Cancel]. The Transmis- sion Mode menu is shown.

E Press [OK].

The Transmission Mode menu is shown again. A check mark is add- ed to Irreg. Scan Area.

F Press [Exit].

ND1X02E9

The Transmission Mode menu ap- pears.

ND1X03E0

86