Ricoh 340 manual Programming Specified Senders, 189, Reference Press RTI/CSI

KEY OPERATOR SETTINGS

Programming Specified Senders

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Authorized RX” using the num- ber keys.

F Enter the function number for “Register Sender” using the num- ber keys.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

G Choose a sender number you wish to register.

7

	Note
The Facsimile User Tool main	❒ If you make a mistake, press the
	{Clear/Stop} key and reenter a
menu appears.	correct value.
Reference	H Press [RTI/CSI].

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

ND1X02E7

189