Ricoh 340 manual 140, Number Fax, Enter, Mode

FACSIMILE USER TOOLS

is shown and you cannot change destinations for this Group.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

E Enter the function number for “Reg. Opt. G.Dial” using the number keys.

F Enter the Optional Group num- ber (10 to 30) you want to register using the number keys.

	Sort		1-Sided	2-Sided			Note
			1 1	2
	Staple			2			❒ If you make a mistake with the
			Book
				2-Sided
	Stack		2-Sided	2-Sided			first digit, press the {Clear/Stop}
			2	2	User Tools / Counter		key and enter a correct number.
	Enhanced		Auto Reduce/				If you make a mistake with the
						ND2L01E0	second digit, press [Cancel] and
7	C						enter the number again.
		the	number		of	the “Fax”	❒ You can press [Status] to see the
	Enter
	mode.						currently registered Optional
							Groups.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Register/Delete” using the num- ber keys.

G Enter the first destination, then press [Add] before entering the next.

Note

❒You can enter destinations in any of the following three ways:

•Enter a fax number with the number keys.

140