Ricoh 340 manual Start key Reference, Press the Start key

MEMORY TRANSMISSION

the remaining pages from the Document Feeder (ADF). After you place the last page on the exposure glass, you have 60 sec- onds to insert the remaining pages in the Document Feeder (ADF).

❒Note that you cannot set pages on the exposure glass after you have started using the Docu- ment Feeder (ADF).

❒Do not open the Document Feeder (ADF) while it is scan- ning in originals.

Note

❒Place the original you want to store in memory on the expo- sure glass or the Document Feeder (ADF). To store multiple page originals from the expo- sure glass, set them page by page.

❒You can scan half the pages of your original from the exposure glass and the remainder from the Document Feeder (ADF). When you have finished scan- ning from the exposure glass, place the rest of the pages in the

Document Feeder (ADF) and press{Start} .

❒The original can be placed at

any time up until you press the

{Start} key.

Reference

P.18 “HOW TO SET AN ORIGI- NAL”

C Select any scan settings you re- quire. ⇒ P.37 “SCAN SETTINGS”

D Dial. If you wish to send the same message to more than one desti- nation, press [Add] and dial anoth-

er destination. Repeat this step for all destinations.

If you make a mistake, press the

{Clear/Stop} key and enter the cor- 2 rect number again.

Note

❒When dialing with the number keys or using Chain Dial (P.46 “Chain Dial”), you can select the line type (G3 or G4) before pressing [Add] in step 4.

❒If you do not set an original within 30 seconds of entering a destination fax number, the transmission is cancelled.

Reference

P.43 “DIALING”

E Press the {Start} key.

d Dial	1	2	3	Clear / Stop
		ABC	DEF	C
ook Dial	4	5	6
	GHI	JKL	MNO	Start
e /
	7	8	9
al

PRS TUV WXY

Enter

0

OPER

ND2R02E1

The machine starts scanning the original.

The machine calls the destination. The name or fax number which is programmed as the RTI or CSI in

25