Ricoh 340 manual When copying onto OHP transparencies or thick paper

COPYING

When copying onto OHP transparencies or thick paper

To make copies onto OHP transpar- encies or thick paper, you need to specify the paper type.

2 Note

❒Select [Thick Paper] if the paper weight is more than 91 g/m2 (20 lb).

A If Duplex mode is selected, press the {Duplex} key to cancel the mode.

B Open the bypass tray, and adjust the guides to the paper size.

Important

❒If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.

C Lightly insert the OHP transpar- encies or thick paper face down until the beeper sounds.

The kindicator on the display is automatically selected.

ND5H05EE

Note

❒When you set a OHP transpar- encies, make sure that its front and back faces are properly po- sitioned.

❒To avoid paper misfeeds, shuf- fle a stack of paper before set- ting it in the tray.

D Press the {#} key.

E Press the [Ppr. Type] key.

ND2C0102

F Select [OHP] or [Thick Paper] with the <> keys. Then, press the [OK] key.

ND2C0109

G Press the [Exit] key.

ND2C0104

Reference

To go on to specify a paper size, press the [Ppr. Size] key.

See ⇒ P.56 “When copying onto non-standard size copy paper”ï

See ⇒ P.57 “When copying onto standard size copy paper”.

èå