Ricoh 340 manual Specified Sender/Forwarding Station list, 181

KEY OPERATOR SETTINGS

Reference H Press [Yes].

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Forwarding” using the number keys.

F Enter the function number for “Delete Sender” using the num- ber keys.

G Choose the Specified Sender you want to delete by entering its code with the number keys.

Note

❒If you make a mistake, press the {Clear/Stop} key and enter a cor- rect number.

❒If you have a mistake with the second digit, press [No] and en- ter the number again.

ND1X03E0

Note

❒If you press [No], the sender is not deleted and the display shown in 7 appears again.

I Press [Yes].

The sender is deleted.

7

ND1X03E0

Note

❒If you press [No], the sender is not deleted and the display shown in 5 appears again.

J Press [PrevMenu] 3 times.

K Press the {User Tools/Counter} key.

Specified Sender/Forwarding Station list

Print this list to find out which Specif- ic Senders are assigned to which For- warding Stations.

181