Ricoh 340 manual Transmission Result Report Memory Transmission, Communication Failure Report

MEMORY TRANSMISSION

Transmission Result Report

(Memory Transmission)

This report is printed when a Memo- ry Transmission is completed so you can check the result of the transmis-

sion. If two or more destinations are2 specified, this report is printed after

the fax message has been sent to all the destinations. If the machine is set up not to print this report and the fax message could not be successfully transmitted, the Communication Fail- ure Report is printed. ⇒ P.29 “Com- munication Failure Report”

Note

❒By default this function is turned on so you need to turn it off. ⇒ P.203 “Changing the User Parame- ters”

❒You can choose whether to include part of the original image on the re-

port (by default, part of the image is printed).⇒ P.203 “Changing the User Parameters”

Communication Failure Report

This report is only printed if the Transmission Result Report is turned off and a message could not be suc- cessfully transmitted with Memory Transmission. Use it to keep a record of failed transmissions so you can send them again.

Note

❒You can choose whether to include part of the original image on the re-

port (by default, part of the image is printed). ⇒ P.203 “Changing the User Parameters”

29