10
TFSSO FRAME INSTALLATION
1. Hang the frame onto the firebox by engaging the | FIGURE 13 |
top trim bracket into the slot in the top of the frame |
|
and the bottom hooks of the frame into the slot in |
|
the mounting cabinet. |
|
FIGURE 12
TRIM
BRACKET
2.Install the trim bracket supplied in your manual baggie to the firebox using 3 screws.
DOOR
CHAIN
SLOT
TRIM
BRACKET
FRAME
(REAR VIEW)
NOTE: If the frame needs to be secured, use two screws in the holes provided behind the control door.
Insert the door stop chain into the receiving slot in the control door. Then insert the door chain into the receiving slot in the frame so that when fully opened the control door has a clearance of 1/8" to the mounting cabinet.
NOTE: In most cases a count of 15 balls on the chain between receiving slots will be sufficient.
FIGURE 14
LOGO PLACEMENT
With the control door closed, affix the logo to the front face of the control door at the bottom left corner.
1/4”
(APPROX.)
FIGURE 15
CONTROL
DOOR
1/4” (APPROX.)