Settings, Making settings, Available Menu Items

Settings (1)

MODE

When this unit is stopped or in playback, press the MODE button for 2 seconds or longer.

Press the MODE button repeatedly to select the menu item to be changed.

Each press changes the display as follows:

CD/Din>SACD>

DF>

USB_PW>

WORD>

OUT>2ndPLL>

ATT>D_OUT>

<Depending on the selected source or current operation, some menu items are not displayed.

<If no operation is performed for 10 seconds, setup mode is cleared and the normal display returns.

<When the menu is displayed and MODE is pressed for 2 seconds or longer or STOP is pressed once, setup mode is exited and the normal display returns.

Use the skip buttons (.//) on the front panel or remote control to change a setting.

Press the MODE button for 2 seconds or longer to exit setup mode.

If no operation is performed for 10 seconds or longer or STOP is pressed once, setup mode is exited and the normal display returns.

<Settings are retained even if the unit's power cord is disconnected.

Sets the up conversion signal processing for CD playback and external input.

Up conversion is not performed. (With a D/A converter, the digital filter performs 32-bit, 8-times oversampling.)

2Fs

When the digital audio signal from a CD or external input is 32/44.1/48 kHz, the input signal is up converted to 64/88.2/96 kHz.

4Fs

When the digital audio signal from a CD or external input is 32/44.1/48/88.2/96 kHz, the input signal is up converted to 128/176.4/192 kHz.

DSD

The PCM digital audio signal from a CD or external input is converted to a DSD signal. (DSD = Direct Stream Digital)

<When “2Fs” or “4Fs” is set and the input signal frequency is the same or higher than the setting, up conversion is not performed.

To change multiple items, repeat steps and .