Lucent Technologies 555-670-116 Constraining Factors, MERLIN LEGEND Communications System Release

	MERLIN LEGEND Communications System Release 7.0			Issue 1
	Pocket Reference 555-670-116			April 1999
Constraining Factors				42
	Hardware and Software Capacities (Continued)
			Constraining
		Limit	Factor
	Speed Dial
	Personal Speed Dial		✓
	Entries per telephone	24
	Entries per system	1200
	Digits per entry	28
	System Speed Dial
	Entries per system	130
	Digits per entry	40
	System Operating Consoles
	Direct-line consoles (DLCs)		✓
	MLX-20L or MLX-28D	8
	BIS-22D, BIS-34D, or MERLIN II
	System Display Consoles	8
	QCCs	4	✓
	Combination of DLCs plus QCCs	8
	DSSs	16
	Number of consoles per module
	408 GS/LS-MLX, 408GS/LS-ID-MLX, or
	008 MLX	2
	016 MLX	4
	408 (LS-ATL) or 008 (ATL)	2
	System Programming Equipment		✓
	MLX-20L	1
	RS-232 jack for PC with SPM or WinSPM	1
	Modem (built-in processor module)	1
	Telephones (not simultaneously)
	Analog multiline
	Without Voice Announce to Busy	136
	With Voice Announce to Busy	68
	MLX-20L	48	✓
	All other MLX telephones
	(with/without ISDN terminal adapter/MFM)	200	✓
	Single-line	200	✓
	ETR/MLS	200	✓
	Power failure transfer	20	✓
	Two-Party Conversations	108	✓
	Voice Messaging Systems	24

Constraining Factors

This section describes the constraining factors that limit the capabilities supplied in the previous table.

Calling Groups

Members of groups. QCCs cannot be members of calling groups because the QCC position is set up as a system operator and has its own queue, which is different from the group’s queue.

Members per group. The maximum number of local extensions in a calling group is 20. The maximum number of non-local extensions in a calling group is 1. A calling group cannot contain both local and non-local extensions.