Lucent Technologies 555-670-116 Technical Addendum, MERLIN LEGEND Communications System Release

MERLIN LEGEND Communications System Release 7.0	Issue 1
Pocket Reference 555-670-116	April 1999
Reference Documents	142

Technical Addendum

NOTE:

If you are using WinSPM, follow the instructions packaged with the software.

Direct Local Connection

Follow these steps to access SPM when you are directly connected to the system via the administration jack on the processor module:

1.Set up the physical connection between your laptop or PC and the control unit.

2.Start SPM and press any key to display the SPM Main Menu.

Local Modem Connection

Follow these steps to access SPM when you are connected onsite via a modem:

1.Set up the physical connections between the PC and a tip/ring port on a control unit module.

2.Type spm and press 1or double-click the icon to display the SPM Welcome screen.

3.Press 1to display a blank screen on which you can enter modem commands. (You may have to press 1several times.)

4.Dial the commands required by your modem and dial *10.

5.Type the SPM password to display the SPM Main Menu.

Remote Modem Connection

Follow these steps to access SPM when you connected offsite via a modem:

1.Type spm and press 1to display the SPM Welcome screen.

2.Press 1to display a blank screen on which you can enter modem commands. (You may have to press 1several times.)

3.If your system has activated the Remote Access feature, type the following:

a.The dial command required by your modem.

b.Remote access telephone number.

c.Barrier code (if existing) preceded by a “W.”

d.W*10 (* 0 is the extension for the programming port).

4.If your system does not have the Remote Access feature activated, do the following:

a.Place a voice call to the system on the line to which the modem is connected by using the main telephone number.

b.Have the operator transfer you to the modem (by pressing Transfer, dialing *10, and hanging up the telephone).

c.To put the modem online by typing the command required by your modem.

d.Press 1, and hang up the telephone.

5.Type the SPM password to display the SPM Main Menu.