Samsung HC-S4755W - page 30

English - 30

OPERATION

3

Press the ENTERbutton.

A crosshatch pattern will

appear on the screen.

Move the cursor to the

position you want to adjust

by pressing the ▲/▼/œ/√

buttons, then press the

ENTERbutton.

Adjust the convergence by

pressing the ▲/▼/œ/√

buttons, then press the

ENTERbutton.

Red

Please use the remote control.

4

If a horizontal line is visible,

use the ▲or ▼ button to

move the line so that it is

superimposed on the

horizontal center-line (i.e.,

make a single horizontal

line that is as white as

possible.).

5

If a vertical line is visible,

use the œor √button to

move the line so that it is

superimposed on the

vertical-center line (i.e.,

make a single vertical line

that is as white as

possible.)

After the convergence is

correctly adjusted, press

the MENUbutton to exit.

Red

Please use the remote control.

Red

Please use the remote control.

Red

Please use the remote control.

6

To return to the factory

defaults, select “Reset” by

pressing the ▲or ▼button,

then press the ENTER

button.

The previously adjusted

convergence will be reset to

the factory defaults.

Press the EXITbutton to exit.

Manual Convergence

Red

√

Blue

√

Reset

Move Enter Return

Input

Picture

Sound

Channel

Setup

Guide

BP68-00545AEng 10/18/05 5:53 PM Page 30

Contents

Main Important Warranty Information Regarding Television Format Viewing A Guide to Digital TV Digital Television Services How to View Digital Television NOTE Q&A English - 6 Chapter 1: Your New TV Chapter 2: Installation Chapter 3: Operation C English - 7 C Chapter 3: Operation Chapter 4: Special Features List of Features Accessories Chapter One Familiarizing Yourself with the TV HC-S5245W HC-S4355W HC-S4755W Page Page Page Page Connecting VHF and UHF Antennas Chapter Two Page Connecting Cable TV If you want to connect cable, and you do not need to use a cable box: English - 17 This terminal might be labeled ANT IN, VHF IN, or simply, IN. Connecting to a Cable Box that Descrambles Some Channels English - 18 Connecting a VCR Also, you can connect to AV IN 2 on the side panel of TV. VCR Rear Panel English - 19 Connecting a Second VCR to Record from the TV Connecting a Camcorder TV Side Panel (HC-S4355W) English - 20 Connecting a DVD Player or DTV Set-Top Box (480i, 480p, 720p, 1080i) Also, you can connect to AV IN 2 on the side panel of TV. The rear panel jacks on your TV make it easy to connect a DVD player or DTV set-top box to your TV. Connecting to Y, PB, PR Connecting to Regular Audio and Video Jacks Connecting a Digital TV Set-Top Box Connecting a Digital Audio System Connecting to an Analog Amplifier Installing Batteries in the Remote Control English - 24 Chapter Three Turning the TV On and Off Plug & Play Feature The Plug & Play function operates after plugging in the TV for the first time. Plug & Play feature doesnt work in the AV mode. ct y ble r English - 26 not pressed, the message will automatically disappear after English - 27 Adjusting the Screen Automatically (Self Focus) English - 28 Removing the Self Focus Message from the Display Deactivating the Automatic Execution of Self Focus Adjusting Convergence Manually BP68-00545AEng 10/18/05 5:53 PM Page 29 r Press the or button to select Picture, then Press the or button to select Manual Convergence, then Page English - 31 Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Viewing the Menus and On-Screen Displays Viewing the Menus Selecting a Menu Language Selecting the Antenna Input You can connect to two different signal sources by choosing the antenna input (Air or Cable). English - 33 BP68-00545AEng 10/18/05 5:53 PM Page 33 Memorizing the Channels Selecting the Video Signal Source to select Auto Program, then press the ENTER Press the MENUbutton. Press the or button to select Channel, then press the ENTER button. English - 34 Storing Channels in Memory STD, HRC and IRC English - 35 Adding and Erasing Channels To add channels that were not memorized (or to delete unwanted channels from memory): t le Changing Channels Use the number buttons to quickly tune to any channel. - The button is used to select channels that broadcast both a digital and analog signal. Selecting Your Favorite Channels To View Your Favorite Channels: To Store Your Favorite Channels: English - 38 Labeling the Channels English - 39 Fine Tuning Analog Channels The symbol * will appear next to the name of the channels you have adjusted. Checking the Digital-Signal Strength English - 41 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Using Automatic Picture Settings English - 42 Customizing the Picture English - 43 Resetting the Picture Settings to the Factory Defaults English - 44 Changing the Screen Size Viewing with a 4:3 signal Viewing with a 16:9 signal (When a 4:3 signal is received) English - 45 Setting the Film Mode s Film mode is supported in 480i only. select Film Mode, then to select Picture, then Setting the Blue Screen Mode BP68-00545AEng 10/18/05 5:53 PM Page 46 select On or Off, then select Blue Screen, then to select Setup, then Sound Control At any time, you can temporarily cut off the sound using the MUTE button. English - 48 Using Automatic Sound Settings Page English - 50 Setting the SRS TSXT Auto Volume d Choosing a Multi-Channel Sound (MTS) track English - 53 Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP. Setting the On/Off Melody A melody sound can be set to come on when the TV is powered on or off. English - 55 Setting the Clock Option 1: Setting the Clock Manually English - 56 Option 2: Setting the Clock Automatically The clock can be set automatically if you are receiving a digital signal. English - 57 Setting the On/Off Timer You must set the clock first. g t Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Viewing an External Signal Source English - 60 Assigning Names to External Input Mode Chapter Four Menu Transparency Level Adjusts the transparency of the menu screen. Setting the Function Help BP68-00545AEng 10/18/05 5:53 PM Page 62 Displays help on the menu functions. to select Off or On, then press theENTER to select Function Help, then press theENTER Using the V-Chip (USA) **** English - 64 How to Enable/Disable the Rating Controls English - 65 How to Set up Restrictions Using TV Parental Guidelines English - 66 How to Set up Restrictions Using Movie Rating G, PG, PG-13, R, NC-17, X Allow All : Press to unlock all movie ratings. Block All : Press to lock all movie ratings. English - 67 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: English - 68 Viewing Closed Captions (On-Screen Text Messages) The availability of captions depends on the program being broadcast. The default is CC1. Viewing Closed Captions (On-Screen Text Messages) The Digital Captions function operates on digital channels. ns English - 70 The availability of captions depends on the program being broadcast. The Default means to follow the rule of broadcasting. Using the Guide ns You can display a list of all channels or your favorite channels. English - 72 Editing the Channel List Customizing Your Remote Control Page Identifying Problems Chapter Five T Cleaning and Maintaining Your TV Using Your TV in Another Country Specifications Appendix