Furuno 1933 Plotter Setup, Navigation options, Plotter setup menu Contents of plotter setup menu

5. CUSTOMIZING YOUR UNIT

5.3Plotter Setup

This paragraph provides the information necessary for setting up the plotter display.

5.3.1Navigation options

Navigation options, for example, waypoint switching method, may be set on the PLOTTER SETUP menu.

1.Show the plotter display, then press the [MENU] key open the main menu.

2.Press the PLOTTER SETUP soft key.

WAYPOINT SWITCHING ARRVL ALM CRCL

COURSE VECTOR

LINE

SET GOTO METHOD

1POINT

PLOTTER SETUP

EDIT

D. BOX

RETURN

Plotter setup menu

Contents of plotter setup menu

Item	Description	Settings	Default Setting
Waypoint	Chooses waypoint switching method.	Perpendicular,	Arrvl Alm Crcl
Switching	See “Switching waypoints” on page	Arrvl Alm Crcl,
	3-50.	Manual
Course Vector	You may extend a line from the own	Line, Vector, Off	Line
	ship position to show ship’s course. It
	may be a vector (length depends on
	ship’s speed) or a simple line (course
	bar).
Set GOTO	Sets the method by which to navigate	1 Point, 35 Points,	1 Point
Method	to a quick point. See paragraph	35Pts/Port SVC
	“3.10.1 Navigating to a quick point.”
D. BOX	Sets up data boxes. See “paragraph 5.5.”
(soft key)

5-8