Furuno 1933, 1943, 1833 manual 26.7 ARP, TTM target data, ARP target data

2. RADAR OPERATION

2.26.7ARP, TTM target data

You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or TTM targets. Note that TARGET ID NUMBER, in the ARP SETUP menu, must be turned on to display this data.

1.Place the cursor on the target whose data you want to see.

2.If not already displayed, press the [HIDE/SHOW] key to show the radar soft keys.

3.Press the TARGET and TARGET INFO soft keys. The data of the selected target appears at the bottom left-hand corner of the display. (If an EBL/VRM data box is displayed ARP data will be under it.)

4.Press the RETURN soft key to finish.

5.To erase the ARP/TTM data box, select the corresponding target with the cursor, then press the [CLEAR] key.

	.250/	.125nm	319.9	° T	TARGET
	SP		+
	H-UP
					TRAIL
Cursor					TLL
					OUTPUT
ARP					ACQ
		01
Target
					TGT
					INFO
					RETURN
	No.01 VECTOR TRUE 15min				359.9° R
	CSE 359.9° T SPD 12.5kt
					+ 0.277nm
	CPA 2.21nm		TCPA 12:35

CPA and TCPA

Course and Speed

Target No., Vector Reference (True), Vector Time

ARP target data

2-42