Furuno 1933, 1943, 1833 Baud rate window, Waypoint data format, Characters available for comment

6.DATA TRANSFER

7.To change the baud rate, press the SELECT BPS soft key.

BAUD RATE

▲°

§4800 bps

9600 bps

19200 bps

▼

Baud rate window

8.Select baud rate, then press the ENTER soft key.

9.Press the DWLOAD or UPLOAD soft key. You are asked if you are ready to download or upload waypoints and routes.

10.Push the [ENTER] knob to download or upload.

Waypoint data format

PFEC, GPwpl, llll.llll,	a,	yyyyy.yyy,	a, c----c, c, c----c, a <CR><LF>
1	2	3	4	5	6	7	8

Waypoint data format

1:Waypoint latitude

2:N/S

3:Waypoint longitude

4:E/W

5:Waypoint name (Number of characters is fixed to 6 and space code is placed when the number of characters are less than 6.)

6:Waypoint color

7:Waypoint comment (1 byte for mark code + 13 characters of comment.) 1st byte of mark code: Fixed to “@”.

2nd byte of mark code: Internal mark code. See Note 1.

8.Information of marking waypoint. Always set to “A”. “A”: Displayed

“V”: Not displayed

Note 1: The following characters can be used for comments:

_ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789&'#

=9	=:	=;	=<	= =
=>	=?	=@		=A
=B	=C	=D		=E
=F		=G		=H

Characters available for comment

6-6