Changing waypoint mark size FURUNO, NavCharts

3. PLOTTER OPERATION

3.8.4Changing waypoint mark size (FURUNO, NavCharts™)

You may change the size of all waypoint marks to small or large (default), or you may turn them off.

1.Press the [MENU] key to open the menu.

2.Press the CHART SETUP and CHART DETAILS soft keys.

LAT/LON GRID ON

TEXT INFORMATION ON

WAYPOINTS LARGE

WAYPOINT NAMES ON

CHART BORDER LINES ON

LANDMASS BRIGHT

NAVAIDS

LIGHT SECTOR INFO ON

OTHER SYMBOLS ON

MARKS SIZE LARGE

CHART DETAILS

EDIT

CNTOUR

LINE

RETURN

Chart details menu

3.Use the trackball to select WAYPOINTS.

4.Press the EDIT soft key.

5.Use the trackball to select LARGE, SMALL or OFF.

LARGE: Shows mark in actual shape.

SMALL: Displays all waypoints with an “X” regardless of mark shape selected.

OFF: Turns off all waypoints and their names. Waypoints currently used in navigation are shown regardless of this setting.

6.Press the ENTER soft key.

7.Press the [MENU] key to close the menu.

3-34

Page 120

Image 120

Furuno 1943, 1933, 1833 manual Changing waypoint mark size FURUNO, NavCharts, Chart details menu

Contents

Marine Radar 00080918601 Furuno agent or dealer about replacement Do not open the equipmentDo not disassemble or modify the equipment Keep heater away from equipment Table of Contents Iii 11.6 Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting Vii Word to the Owner of the Model 1833/1933/1943 Marine Radar Viii Features NavNet system NavNet system Two-unit NavNet system Two-unit NavNet systemThree-or-more-unit NavNet system What is WAAS? Xii Operational Overview Operating Controls Display unit controlsOverview of display unit controls Control panel Soft keys Display unitRadar display Enter knob Alphabet, symbol, numeric Enter knobNumerics Trackball Remote controller Remote controller Inserting a Chart Card Chart card and card removerDisplay unit Turning the Unit On/Off Startup sequence Brilliance adjustment soft keys Display brilliance, panel brillianceDisplay brilliance and panel brilliance windows Economy mode Brilliance boost Selecting a Display Display modesDisplay screens Screen type and available display screen Selecting a display Display screen selection windowRadar combination screen selection window Switching control in combination screens Selecting image source Select source menuRadar source and sounder source windows Trackball, Cursor Cursor, cursor data Entering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Data Boxes Showing, hiding data boxes with soft keyRearranging data boxes Temporarily erasing a data box Function Keys Executing a functionFunction keys Simulation setup menu Simulation DisplayRadar NavNet display unit-generated echoes NavNet radar antenna-generated echoes Plotter Sounder Radar Operation Radar Display Tuning Adjusting the GainTuning window Transmitting, Stand-by Gain adjustment soft keys Gain sensitivity window Adjusting the A/C SEA SEA setting windowReducing Sea Clutter How the A/C SEA works Adjusting the A/C Rain Rain setting windowReducing Precipitation Clutter Range Scale Range scales nm, smRange scales km Signal process soft keys Pulselength Presentation Mode Selecting a presentation modeRadar display soft keys Head-up presentation mode Course-up presentation modeDescription of presentation modes Head-up H-UP North-up presentation mode True motion presentation modeNorth-up N-UP True motion TR-M Measuring the Range Measuring range by range rings How to measure range to a target with the cursor Measuring range by cursor How to measure range with the VRM Measuring range by VRMEBL/VRM soft keys Erasing a VRM, VRM indication Erasing EBL/VRM data boxesHiding EBL/VRM data boxes Moving EBL/VRM data boxes How to measure bearing with the EBL Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBL Erasing the Heading Line, North Marker Erasing an EBL, EBL indication Reducing Noise Interference Rejecting Radar Interference Radar interference Zoom Zooming in on radar targetsZooming in on ARP, TTM targets Zoom Shifting the Picture Manual shiftTarget no. selection window Shifting the picture manually Setting automatic shift maximum speed Auto ship speed setting windowAutomatic shift Automatic shift Using the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range & bearing between two targets Measuring range and bearing between two targets Echo Trails Trail timeSample echo trails Trail soft keys Starting echo trails Trail gradationMultitone and monotone trails Echo trail mode Trail mode window Echo Stretch Types of echo stretch Echo Averaging Effect of echo averaging Outputting TLL Data Target soft keys Guard Alarm Setting a guard alarm zoneHow to set a guard alarm zone When the alarm is violated… Cancelling the guard alarm Setting watchman stand-by interval WatchmanHow watchman works Turning on/off watchman Suppressing Second-trace Echoes Second-trace echoes Waypoint Marker Waypoint marker 26 ARP, TTM Operation Display accuracy is affected by the following ARP setup menu Activating/deactivating ARP, TTMARP target info window ARP plot symbols Acquiring and tracking targets ARPManual acquisition Automatic acquisition Displaying target number ARP, TTM Automatic acquisition areaARP target number Cancel all targets window Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targets Setting vector attributes ARP What is a vector?Vector reference, vector time Displaying past position ARP Past position displaysPlot interval window 26.7 ARP, TTM target data ARP target data 26.8 CPA/TCPA alarm ARP CPA window Lost target alarm ARP Canceling a lost targetTcpa window Lost target mark Interpreting the Radar Display GeneralMinimum and maximum ranges Radar resolution Bearing resolutionRange resolution Bearing accuracy False echoes Multiple echoesMultiple echoes Sidelobe echoes Virtual image Virtual imageShadow sectors Shadow sectors Appearance of Sart signal on the radar display Sart Search and Rescue Transponder General procedure for detecting Sart response General remarks on receiving Sart Appearance of racon signal on the radar display Racon Radar BeaconSEA control Rain control This page is intentionally left blank Plotter Displays Full-screen plotter displayFull-screen plotter display Contents of nav data window Nav data window001WPT Compass display Compass display Reading the XTE cross-track error monitor Setting the range for the XTE monitorXTE range setting window Soft keys Highway display Highway display Nav data display Nav data displays Plotter display, north-up mode North-up Course-up Auto course-upPlotter display, course-up mode, destination set Auto course-up display Chart Scale Charts scalesShifting the Display Chart Cards Chart card overviewIndices and chart enlargement Chart icons and their meanings Furuno and NavCharts charts When a chart cannot be displayedChart symbols Chart symbols Data for aids to navigation Lighthouse markExample of buoy, lighthouse data Port service icons NavCharts only Plotter display, showing port service display MAP charts Cursor and data displayObjects window Example of caution area window Icon data Lighthouse iconObject windows Sample lighthouse data Tide informationObjects window Tide window Date window Working with Track Displaying trackOwn ship track Track control menu Stopping, restarting plotting of own ship track Target track Track plotting method and interval for own ship track Track plotting methodInterval window Track plotting interval Changing own ship track/mark distribution setting Track memory window Erasing track Erasing own ship track by areaErase menu Erasing all own ship track Erasing all target tracks Marks, Lines Entering a mark, lineChanging mark attributes Mark shapes Selecting line type Marks shape window Erasing marks, lines Lines style windowErasing an individual mark Erasing an individual line Erasing all marks, lines Waypoints Entering waypointsEntering a waypoint at own ship position Entering a waypoint with the cursor Select Mark Waypoint ark shape selection window Entering a waypoint by range and bearing Editing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint list Editing a waypoint from the plotter display Plotter display Erasing waypoints Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Erasing a waypoint from the waypoint list Changing waypoint mark size FURUNO, NavCharts Chart details menu Searching waypoints Alphanumeric list Routes Creating routesEntering a route with existing waypoints Route menu Entering a route with the cursor Creating voyage-based routes Save route menuSave route window Displays for entry of time, distance interval For manual entry of waypoints, do the followingTo stop recording waypoints and save the route Connecting routes Connect route window Inserting a waypoint in a route Inserting a waypoint from the route listEdit route menu Waypoint list for editing a route local list Inserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a route Removing waypoints from a route Erasing routesRemoving a waypoint from the route list Removing a waypoint from the plotter display Navigation Navigating to a quick pointSelecting quick point entry method Go to method window Navigating to waypoints Navigating to multiple quick pointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint list Navigating to ports, port services NavCharts only Port services and sample port list Sample filling station locations southern Italy Following a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse order Example of when to restart navigation Restarting navigationLog display Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA window Cancelling route navigation Alarms Audio alarm on/offPlotter alarm menu Audio alarm window Arrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm window Proximity alarm Proximity alarm windowProximity mark Trip alarm Trip alarm window Alarm information Plotter alarm menu, Alarm messages Plotter alarm messages and their meanings Resetting Trip Distance General setup menu, Principle of Operation Underwater conditions and video sounder display Display mode window Sounder DisplaysSelecting a sounder display 114 Description of sounder displaysSingle-frequency display Dual-frequency display Dual-frequency display KHz pictureSounding area and transmission frequency Marker-zoom display Marker-zoom display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display Bottom-lock display plus normal sounder displayBottom discrimination display Bottom discrimination display Selecting screen split method in combination displays Scope display display onlyScope display How to enable automatic sounder operation Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modes Selecting the manual mode Adjusting the gainManual Sounder Operation Selecting display range Shifting the range Gain windowShift concept How to measure depth and time Measuring Depth, Time Reducing Interference Types of interferenceNoise limiter window Reducing Low Level Noise Appearance of clutterClutter window Signal level window Erasing Weak EchoesAppearance of weak echoes Picture Advance Speed Advancement independent of ship’s speedPicture advance window How the speed-dependent picture advance mode works Advancement synchronized with ship’s speed Sounder alarm menu Bottom alarm Fish alarmBottom alarm window Fish alarm window Fish alarm B/L Fish alarm B/L window Water temperature alarm Water temperature alarm window When an alarm setting is violated Depth Alarm Water Temperature Graph Sounder alarm messages and their meanings Interpreting the Sounder Display Zero lineBottom echo Zero line Fish school echoes Surface noise/AerationFish school echoes Surface noise/aeration General Setup General setup menu Contents of general setup menu Con’t on next Radar Setup Radar display setupContents of general setup menu con’t from previous Radar display setup menu Contents of radar display setup menu Radar range setup Radar range setup menu Function key setup Radar function keyRadar function key options Radar function keys Menu Item Function Function Key Plotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Function key setup Function Default Function Key Key LabelPlotter function key menu Plotter function key options Plotter function keys RUL Chart Setup Chart offsetPlotter display, chart offset selected FURUNO, NavCharts chart attributes MAP chart attributes Contour line menu FURUNO, NavChartsChart details menu C-MAP Cntour Line soft key Contents of chart details menu C-MAP Depth Info soft key Depth info menu C-MAP Data Boxes Setup Data box menu Hot Page Setup Hot page setup screen, HOT Navigator Setup Contents of nav setup menuNavigation data source GPS receiver setup GPS setup menu Contents of GPS setup menu Contents of GPS setup menu con’t from previous Contents of GPS sensor settings menu con’t from previous Waas Setup Contents of Waas Setup menu TD display setup TD setup menuDisplaying Loran C TDs Loran GRI & station pair window Displaying Decca TDs Decca chain and station pair window Nav Data Display Setup Nav data setup screenNav data setup window Sounder Setup System setupOn next Sounder system setup menu description con’t from previous TVG Sensor setup Sensor setup menuSensor setup menu settings Sounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock ranges Sounder function key menu Sounder function key options Sounder function keys Memory Card Operations Formatting memory cardsSave data menu Saving data to a memory card Memory card messages Memory card messages Playing back data from a memory card Load data menu Setting communication software on the PC Uploading, Downloading DataUploading or downloading data Upload and download menus Baud rate window Waypoint data formatWaypoint data format Characters available for comment Route data menu Route comment data formatEnd of sentence Loading Waypoint Data from Yeoman Receiving Data Via Network Equipment Receive data menuHost name window Marks & lines window Outputting Data Through the Network Select sentence menu Preventive Maintenance Replacement of BatteryMaintenance program Replacement of Fuse Trackball Maintenance Simple Troubleshooting General troubleshootingRadar troubleshooting Radar Plotter troubleshooting Plotter Sounder troubleshooting Sounder Diagnostics Memory I/O test Display unit test Display unit test resultsGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test results Network sounder test Requires Network Sounder ETR-6/10N Network sounder test resultsARP test results Test pattern Test patterns Keyboard, remote controller test Screen for testing keyboard, remote controller GPS Status Display GPS status display Clearing Memories Memory clear menuWindows for clearing memory Error Messages Error messages This page is intentionally left blank Menu Overview Menu key Appendix LAT/LON Format DD MM. MM’ DD MM. MMM’ DD MM. MMMM’ 4800 Plotter Chart Border Line ON, OFF Speed 010.0 kt 0-999.9 kt Temperature Graph ON, OFF Alarm key Radar AlarmsPlotter Alarms Sounder Alarms Geodetic Chart List World Time Chart Icons V E Specifications of Marine Radar Model 1833/1933/1943 E3502S01D Plotter Function Coating Color Index Index-1 Index-2 Index Index-3 Messages Presentation mode Index-4 Index-5 Waypoints