Furuno 1943, 1933, 1833 manual Alarm information, Plotter alarm menu

3. PLOTTER OPERATION

3.11.8Alarm information

When an alarm setting has been violated, the buzzer sounds and the speaker icon appears. Press the [CLEAR] key to silence the alarm. You can see which alarm has been violated on the ALARM menu. In the example below the arrival alarm has been violated.

1.Press the [ALARM] key. The name of the offending alarm appears in the alarm information window.

AUDIO ALARM

INT & EXT BUZZ

ARRIVAL ALARM

ON 0.010nm

ANCHOR WATCH ALARM

OFF 0.010nm

PROXIMITY ALARM

OFF

XTE ALARM

OFF 0.050nm

SPEED ALARM

OFF

	TRIP ALARM
	OFF 0000.0nm
	ALARM INFORMATION
Alarm information	ARRIVED
window	AT WAYPOINT XXX!

ALARM1

EDIT

CLEAR

ALARM

NEXT

PAGE

RETURN

Speaker icon

XXX = Destination waypoint name

Plotter alarm menu, page 1

2.Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the buzzer if it was not already done with the [CLEAR] key). The speaker icon remains on the screen until the reason for the alarm is eliminated or the alarm is disabled. If more than one alarm has been violated, the message CONTINUE appears at the bottom of the alarm information window. In this case, press the NEXT INFO soft key to see which other alarms have been violated.

3.Press the [ALARM] key to close the alarm menu.

3-58