Furuno 1943, 1933, 1833 Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart navigation function to restart navigation.

Line 2

Line 1

Obstacle

Original course

Example of when to restart navigation

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

	Destination waypoint (WPT name against bright background)
	Passed waypoint (green characters)
		Estimated Time of Arrival at destination
	ETA 23:59 11.FEB			LOG
	01	001WPT	LEG	RE-	Replaced by
	34° 44.111'N			START
	135° 21.134'W		°		"FOLLOW LEG"
			29.9
	02	003WPT	12.0nm		when selecting
				STOP
	▲ 34° 43.432'N				a route leg.
	135°	41.456'W	159.9°
	03	002WPT	6.00nm
	34° 14.124'N			RVRSE
Replaces triangle	135° 21.567'W		50.5°
	04	005WPT	29.8nm
when selecting a
	34° 44.569'N
route leg.	135° 21.152'W		359.9°	SPEED
	05	008WPT	3.0nm
	34° 54.124'N
	135° 21.888'W			COORD
				TYPE

Log display

4.Use the trackball to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the RESTART soft key, or FOLLOW LEG in case of route leg.

Note: Navigation may be restarted from the plotter display, with the RESTART key, when a single quick point (QP<01>) is selected for navigation.

6. Press the [MENU] key to close the menu.

3-49