5. CUSTOMIZING YOUR UNIT

5.Press the ENTER soft key to register your selection.

6.If necessary, you may enter a position offset to refine Loran C position accuracy. Select (GRI) CORRECTION 1 or CORRECTION 2, then press the EDIT soft key. Enter correction value with the trackball and [ENTER] knob. Use the + < − −> - soft key to switch from plus to minus and vice versa. Press the ENTER soft key or push the [ENTER] knob.

7.Press the RETURN soft key twice.

8.Press the GENERAL SETUP soft key followed by the NEXT PAGE soft key.

9.Select “LORAN C” from “TD DISPLAY” and “TD” from “POSITION DISPLAY.”

10.Press the [MENU] key twice to close the menu.

Displaying DECCA TDs

1.Select CHAIN, then press the EDIT soft key to show the chain & station pair window.

CHAIN STATION PAIR

01

R-G

 

 

S BALTIC

 

 

Decca chain and station pair window

2.Adjust the trackball upward or downward to select Decca chain number.

3.Roll the trackball rightward to show the display below, to enable selection of station pair.

CHAIN STATION PAIR

 

 

01

R-G

 

 

S BALTIC

 

 

Decca chain and station pair window

4.Adjust the trackball upward or downward to select station pair (R: red, G:

green and P: purple).

5.Press the ENTER soft key to register your selection.

6.If necessary, you may enter position offset to refine Decca position. Select (CHAIN) CORRECTION 1 or CORRECTION 2, then press the EDIT soft key. Enter correction value with the trackball and [ENTER] knob. Use the

+ < − −> - soft key to switch from plus to minus and vice versa. Press the ENTER soft key or push the [ENTER] knob.

7.Press the RETURN soft key twice.

8.Press the GENERAL SETUP soft key followed by the NEXT PAGE soft key.

9.Select “DECCA” from “TD DISPLAY” and “TD” from “POSITION DISPLAY.”

10.Press the [MENU] key twice to close the menu.

5-25

Page 195
Image 195
Furuno 1943, 1933, 1833 manual Displaying Decca TDs, Decca chain and station pair window