Furuno 1943, 1933, 1833 manual Uploading, Downloading Data, Setting communication software on the PC

6. DATA TRANSFER

6.2Uploading, Downloading Data

You can upload/download waypoints, routes, marks and lines from/to a PC, through the DATA 4 port at the rear of the display unit. Note that radar and sounder data cannot be uploaded or downloaded.

6.2.1Setting communication software on the PC

The communication format (RS-232C) with the PC is as follows:

Baud Rate:	4800 bps
Character Length: 8 bits
Stop bit:	1 bit
Parity:	None
X Control:	XON/XOFF (fixed)

The following data can be downloaded/uploaded between a PC and this equipment:

•Waypoint data (In alphanumeric order)

•Route data (In order of route number)

•End of sentence

Note 1: There are two kinds of data for route data: route data and route comment data.

Note 2: Wiring information appears on the UPLOAD or DOWNLOAD menu.

6.2.2Uploading or downloading data

1.Connect the PC to the equipment.

2.Press the [MENU] key to show the main menu.

3.Press the SYSTEM CONFIGURATION soft key.

4.Press the DATA TRANSFER soft key.

5.Press the UPLOAD/DOWNLOAD DATA soft key.

6.Press the DOWNLOAD WPT/ROUTE TO PC or UPLOAD WPT/ROUTE FROM PC soft key.

▲WAYPOINT & ROUTES

OFF

MARKS & LINES OFF

RS232C SETTINGS

·4800BPS,

·8BIT, ·1STOP BIT,

·PARITY NONE,

·CONTROL Xon/Xoff

WIRING INFORMATION DISPLAY UNIT PC: DSUB9 TxD >1>-WHITE-<2<RD RxD >2>-BLUE -<3<SD

RD-A	>3>-YELLOW
RD-B	>4>-GREEN
+12V	>5>-RED
EXT BUZZ >6>-BLACK
GND	>7>-SHIELD-<5<SG

UPLOAD

EDIT

UPLOAD

SELECT

BPS

RETURN

▲WAYPOINT & ROUTES

OFF

MARKS & LINES OFF

RS232C SETTINGS

·4800BPS,

·8BIT, ·1STOP BIT,

·PARITY NONE,

·CONTROL Xon/Xoff

WIRING INFORMATION DISPLAY UNIT PC: DSUB9 TxD >1>-WHITE-<2<RD RxD >2>-BLUE -<3<SD

RD-A	>3>-YELLOW
RD-B	>4>-GREEN
+12V	>5>-RED
EXT BUZZ >6>-BLACK
GND	>7>-SHIELD-<5<SG

DOWN-

LOAD

EDIT

DWLOAD

SELECT

BPS

RETURN

Upload and download menus

6-5