Furuno 1943, 1933, 1833 manual Plotter function keys, Rul

5.CUSTOMIZING YOUR UNIT

4.Select function desired with the trackball, then press the ENTER soft key or [ENTER] knob to register your selection.

5.Press the [MENU] key to close the menu.

Plotter function keys

Menu Item	Function	Function Key
		Label
OFF	Assigns no function.	—
ADD: ADD NEW WPT	Registers waypoint at cursor position. Place	ADD
	cursor for waypoint location then press function
	key.
MWP: MOVE WPT	Moves selected waypoint to different position.	MWP
	Select waypoint, press function key, move
	waypoint, then push [ENTER] knob.
RUL: RULER	Measures range and bearing between two	RUL
	points. Set cursor on location, then read range
	and bearing at top of screen. To change origin
	point, press START POINT soft key.
GWP: GOTO WPT	Specify waypoint to set as destination. Enter	GWP
	waypoint name in window, then press the
	ENTER soft key.
GRT: GOTO ROUTE	Specify route to follow. Enter route name in	GRT
	window, then press the ENTER soft key.
EML: EDIT MK/LINE	Displays mark & line menu. Press appropriate	EML
	soft key to access menu item.
TRK: TRACK ON/OFF	Each press starts or stops recording/plotting	TRK
	own ship’s track.
TTM: TTM ON/OFF	Turns TTM (Target Track Message) display	TTM
	on/off.
DTT: DEL TGT TRACK	Erases all TTM track.	DTT
ALP: ALPHA LIST	Displays waypoint alphanumeric list.	ALP
LCL: LOCAL LIST	Displays waypoint local list.	LCL
RTE: ROUTE LIST	Displays route list.	RTE
DBX: D. BOX ON/OFF	Shows/hides data boxes.	DBX
CHG: CHANGE CNTRL	Changes control in combination screen.	CHG

Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.

5-10