Furuno 1933, 1943, 1833 manual Radar range setup menu

5. CUSTOMIZING YOUR UNIT

5.2.2Radar range setup

You may choose the radar ranges you wish to use, from the RADAR RANGE SETUP menu. After choosing the ranges desired, change the range with the [RANGE] key to activate range settings. Available ranges depends on the radar used.

At least two ranges (excluding maximum range) must be turned on. When less than two ranges are turned on, you cannot escape from the RADAR RANGE SETUP menu.

1.Press the [MENU] key to show the main menu.

2.Press the RADAR RANGE SETUP soft key to show the RADAR RANGE SETUP menu.

	0.125nm	ON
	0.25nm	ON
	0.5nm	ON
	0.75nm	ON
▲	1nm	OFF
	1.5nm	ON
	2nm	OFF
	3nm	ON
	4nm	OFF
	6nm	ON
	8nm	OFF
	12nm	ON
	16nm	OFF
	24nm	ON
	36nm	ON
	48nm	OFF
	64nm	OFF

MAXIMUM RANGE XXnm*

RANGE SETUP

ON/OFF

RETURN

	0.25km	ON
	0.5km	ON
	0.75km	ON
	1km	OFF
▲	1.5km	ON
	2km	OFF
	3km	ON
	4km	OFF
	6km	ON
	8km	OFF
	12km	ON
	16km	OFF
	24km	ON
	36km	ON
	48km	OFF
	64km	OFF

MAXIMUM RANGE XXnm*

RANGE SETUP

ON/OFF

RETURN

* = Max. range depends on network radar used and is set on the network radar at installation.

Range unit: nm Range unit: km

Radar range setup menu

3.Use the trackball to select the range which you want to turn on or off.

4.Press the ON/OFF soft key to turn a range on or off as appropriate.

5.Press the RETURN soft key to register settings.

6.Press the [MENU] key to close the menu.

Model	Maximum Range
1833	36 nm, km, sm
1933	48 nm, km, sm
1943	64 nm, km, sm

5-5