Furuno 1933, 1943, 1833 manual Proximity mark, Proximity alarm window

3.PLOTTER OPERATION

4.Use the trackball to select WITHIN, UNDER/OVER, or OFF as appropriate.

5.For WITHIN and UNDER/OVER use the trackball to select digit; rotate the [ENTER] knob to enter value.

6.Press the ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to finish.

3.11.6Proximity alarm

The proximity alarm alerts you when own ship nears a waypoint, which is marked with the proximity mark, by the proximity alarm radius set for that waypoint on the waypoint list. When own ship is within a waypoint’s proximity alarm radius, the alarm sounds. The proximity mark remains on the screen until the proximity alarm is turned off or the waypoint is erased.

Radius in proportion to proximity alarm radius, which is set on waypoint list

001WPT

Proximity mark

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select PROXIMITY ALARM.

3.Press the EDIT soft key to show the proximity alarm window.

PROXIMITY ALARM

▲°

§ON OFF

▼

Proximity alarm window

4.Use the trackball to select ON or OFF as appropriate, then press the ENTER soft key.

5.Press the [ALARM] key to finish.

3-56