Furuno 1933, 1943, 1833 manual GPS receiver setup, GPS setup menu Contents of GPS setup menu

5. CUSTOMIZING YOUR UNIT

5.7.2GPS receiver setup

The GPS SETUP menu sets up the GPS Receiver GPS-310B/320B. Press the [MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft keys to display this menu.

LOCAL TIME OFFSET	GPS
	SETUP
+00:00
GEODETIC DATUM
WGS-84	EDIT
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING	GPS
005 second(s)
GPS SPEED AVERAGING	STATUS
060 second(s)
LATITUDE OFFSET
0.000’N	WAAS	Appears only when
LONGITUDE OFFSET	SETUP
0.000’E		GPS-320B is connected.
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
45° 35.000’ N
LONGITUDE
125° 00.000’ W	RETURN
ANTENNA HEIGHT
005 m
GPS FIX MODE
2D/3D
COLD START
NO

GPS setup menu

Contents of GPS setup menu

Item	Description	Settings	Default Setting
Local Time	GPS uses UTC time. If you would	-13:30 to +13:30	00:00
Offset	rather use local time, enter the time	hours
	difference between it and UTC. Use
	the +< - ->- soft key to switch from
	plus to minus and vice versa.
Geodetic	Geodetic datum is a reference for	See Appendix for	WGS-84
Datum	geodetic survey measurements	full list.
	consisting of fixed latitude, longitude
	and azimuth values associated with a
	defined station of reference. You
	must have the correct geodetic
	datum selected in your plotter so that
	it will reference the correct point on
	the chart for a given latitude and
	longitude. Although WGS-84 is now
	the world standard, other categories
	of charts still exist. Refer to Appendix
	for a full list of geodetic datum.

(Con’t on next page)

5-20