Radar Setup, Radar display setup | Furuno 1833, 1943, 1933 specs

5. CUSTOMIZING YOUR UNIT

Contents of general setup menu (con’t from previous page)

Item	Description	Settings	Default Setting
Bearing	Chooses bearing readout for course,	True, Magnetic	Magnetic
Readout	course over ground and cursor bearing.

Magnetic	The magnetic variations for all areas of	Auto, Manual	Auto (07.0°W)
Variation	the earth are preprogrammed into this
	unit. The preprogrammed variation is
	accurate for most instances, however
	you may wish to manually enter a
	variation. For manual input, select
	Manual, hit the EDIT soft key, enter
	value, then hit the ENTER soft key to
	set. “AUTO” requires position data.
Video Boost	Sets the amount of time to use	3, 5, 10, 15 (min)	5 (min)
Time	increased brilliance when the BRILL
	BOOST soft key is operated.

5.2Radar Setup

This paragraph explains how to customize the radar display to suit your operational needs.

5.2.1Radar display setup

The radar display may be set up from the RADAR DISPLAY SETUP menu, which contains items such as EBL reference and cursor position format.

1.Press the [MENU] key to show the main menu.

2.Press the RADAR DISPLAY SETUP soft key.

	EBL REFERENCE	DISPLAY
	EBL REFERENCE	SETUP
	RELATIVE	SETUP
	RELATIVE
	CURSOR POSITION	EDIT
	RNG & BRG-REL	EDIT
	RNG & BRG-REL
	▲
	TUNING
	AUTO	D. BOX
	TX SECTOR	D. BOX
	TX SECTOR
	OFF 000° 001°
	NOISE REJECTION
	OFF
	2ND ECHO REJECTION
	OFF
	WATCHMAN TIME
	5 minutes
	RANGE UNIT	RETURN
	nm
	TRAIL MODE
	TRUE

Radar display setup menu

5-3

Image 173

Furuno 1833, 1943, 1933 manual Radar Setup, Contents of general setup menu con’t from previous, Radar display setup menu

Contents

Marine Radar 00080918601 Do not open the equipment Furuno agent or dealer about replacementDo not disassemble or modify the equipment Keep heater away from equipment Table of Contents 11.6 Iii Plotter Operation Video Sounder Operation Customizing Your Unit Vii MAINTENANCE, Troubleshooting Viii Word to the Owner of the Model 1833/1933/1943 Marine Radar Features NavNet system NavNet system Three-or-more-unit NavNet system Two-unit NavNet systemTwo-unit NavNet system Xii What is WAAS? Operational Overview Display unit controls Operating ControlsOverview of display unit controls Control panel Radar display Soft keysDisplay unit Enter knob Enter knob Alphabet, symbol, numericNumerics Trackball Remote controller Remote controller Display unit Inserting a Chart CardChart card and card remover Startup sequence Turning the Unit On/Off Display brilliance and panel brilliance windows Brilliance adjustment soft keysDisplay brilliance, panel brilliance Brilliance boost Economy mode Display modes Selecting a DisplayDisplay screens Screen type and available display screen Radar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination screens Radar source and sounder source windows Selecting image sourceSelect source menu Cursor, cursor data Trackball, Cursor MOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Showing, hiding data boxes with soft key Data BoxesRearranging data boxes Temporarily erasing a data box Function keys Function KeysExecuting a function Simulation Display Simulation setup menuRadar NavNet display unit-generated echoes Plotter NavNet radar antenna-generated echoes Sounder Radar Display Radar Operation Adjusting the Gain TuningTuning window Transmitting, Stand-by Gain sensitivity window Gain adjustment soft keys SEA setting window Adjusting the A/C SEAReducing Sea Clutter How the A/C SEA works Reducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Pulselength Signal process soft keys Radar display soft keys Presentation ModeSelecting a presentation mode Course-up presentation mode Head-up presentation modeDescription of presentation modes Head-up H-UP True motion presentation mode North-up presentation modeNorth-up N-UP True motion TR-M Measuring range by range rings Measuring the Range Measuring range by cursor How to measure range to a target with the cursor EBL/VRM soft keys How to measure range with the VRMMeasuring range by VRM Erasing EBL/VRM data boxes Erasing a VRM, VRM indicationHiding EBL/VRM data boxes Moving EBL/VRM data boxes Measuring the Bearing How to measure bearing with the EBLMeasuring bearing by cursor Measuring bearing by EBL Erasing an EBL, EBL indication Erasing the Heading Line, North Marker Reducing Noise Interference Radar interference Rejecting Radar Interference Zooming in on radar targets ZoomZooming in on ARP, TTM targets Zoom Manual shift Shifting the PictureTarget no. selection window Shifting the picture manually Auto ship speed setting window Setting automatic shift maximum speedAutomatic shift Automatic shift Predicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range and bearing between two targets Measuring range & bearing between two targets Trail time Echo TrailsSample echo trails Trail soft keys Multitone and monotone trails Starting echo trailsTrail gradation Trail mode window Echo trail mode Types of echo stretch Echo Stretch Effect of echo averaging Echo Averaging Target soft keys Outputting TLL Data How to set a guard alarm zone Guard AlarmSetting a guard alarm zone Cancelling the guard alarm When the alarm is violated… Watchman Setting watchman stand-by intervalHow watchman works Turning on/off watchman Second-trace echoes Suppressing Second-trace Echoes Waypoint marker Waypoint Marker Display accuracy is affected by the following 26 ARP, TTM Operation ARP target info window ARP setup menuActivating/deactivating ARP, TTM Acquiring and tracking targets ARP ARP plot symbolsManual acquisition Automatic acquisition ARP target number Displaying target number ARP, TTMAutomatic acquisition area Terminating tracking of ARP targets Cancel all targets windowTerminating tracking of selected targets Terminating tracking of all targets Vector reference, vector time Setting vector attributes ARPWhat is a vector? Plot interval window Displaying past position ARPPast position displays ARP target data 26.7 ARP, TTM target data CPA window 26.8 CPA/TCPA alarm ARP Canceling a lost target Lost target alarm ARPTcpa window Lost target mark Minimum and maximum ranges Interpreting the Radar DisplayGeneral Bearing resolution Radar resolutionRange resolution Bearing accuracy Multiple echoes False echoesMultiple echoes Sidelobe echoes Virtual image Virtual imageShadow sectors Shadow sectors Sart Search and Rescue Transponder Appearance of Sart signal on the radar display General remarks on receiving Sart General procedure for detecting Sart response Racon Radar Beacon Appearance of racon signal on the radar displaySEA control Rain control This page is intentionally left blank Full-screen plotter display Plotter DisplaysFull-screen plotter display 001WPT Contents of nav data windowNav data window Compass display Compass display Setting the range for the XTE monitor Reading the XTE cross-track error monitorXTE range setting window Soft keys Highway display Highway display Nav data displays Nav data display North-up Plotter display, north-up mode Auto course-up Course-upPlotter display, course-up mode, destination set Auto course-up display Shifting the Display Chart ScaleCharts scales Chart card overview Chart CardsIndices and chart enlargement Chart icons and their meanings When a chart cannot be displayed Furuno and NavCharts chartsChart symbols Chart symbols Example of buoy, lighthouse data Data for aids to navigationLighthouse mark Plotter display, showing port service display Port service icons NavCharts only Cursor and data display MAP chartsObjects window Example of caution area window Object windows Icon dataLighthouse icon Objects window Sample lighthouse dataTide information Date window Tide window Displaying track Working with TrackOwn ship track Track control menu Target track Stopping, restarting plotting of own ship track Track plotting method Track plotting method and interval for own ship trackInterval window Track plotting interval Track memory window Changing own ship track/mark distribution setting Erase menu Erasing trackErasing own ship track by area Erasing all target tracks Erasing all own ship track Entering a mark, line Marks, LinesChanging mark attributes Mark shapes Marks shape window Selecting line type Lines style window Erasing marks, linesErasing an individual mark Erasing an individual line Erasing all marks, lines Entering waypoints WaypointsEntering a waypoint at own ship position Entering a waypoint with the cursor Waypoint ark shape selection window Select Mark Entering a waypoint by range and bearing Entering a waypoint from the waypoint list Editing waypoint dataAlphanumeric and local waypoint lists Editing waypoint data from the waypoint list Plotter display Editing a waypoint from the plotter display Erasing a waypoint directly from the plotter display Erasing waypointsErasing a waypoint from the menu Erasing a waypoint from the waypoint list Chart details menu Changing waypoint mark size FURUNO, NavCharts Alphanumeric list Searching waypoints Creating routes RoutesEntering a route with existing waypoints Route menu Entering a route with the cursor Save route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connect route window Connecting routes Inserting a waypoint from the route list Inserting a waypoint in a routeEdit route menu Waypoint list for editing a route local list Inserting a waypoint in an intermediate location on a route Inserting a waypoint from the plotter display Erasing routes Removing waypoints from a routeRemoving a waypoint from the route list Removing a waypoint from the plotter display Navigating to a quick point NavigationSelecting quick point entry method Go to method window Navigating to multiple quick points Navigating to waypointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint list Port services and sample port list Navigating to ports, port services NavCharts only Sample filling station locations southern Italy Selecting the route to follow Following a routePlotter display, route selected as destination Navigating waypoints in reverse order Log display Example of when to restart navigationRestarting navigation Switching waypoints Setting speed for ETA calculationAutomatic waypoint switching methods Select speed for ETA window Cancelling route navigation Audio alarm on/off AlarmsPlotter alarm menu Audio alarm window Arrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works Speed alarm XTE Cross-Track Error alarmHow the XTE alarm works XTE alarm window Proximity mark Proximity alarmProximity alarm window Trip alarm window Trip alarm Plotter alarm menu, Alarm information Plotter alarm messages and their meanings Alarm messages General setup menu, Resetting Trip Distance Underwater conditions and video sounder display Principle of Operation Selecting a sounder display Display mode windowSounder Displays Single-frequency display 114Description of sounder displays Dual-frequency display KHz picture Dual-frequency displaySounding area and transmission frequency Marker-zoom display Bottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom-lock display plus normal sounder display Bottom-lock displayBottom discrimination display Bottom discrimination display Scope display Selecting screen split method in combination displaysScope display display only Automatic Sounder Operation How to enable automatic sounder operationHow the automatic sounder works Types of automatic sounder modes Adjusting the gain Selecting the manual modeManual Sounder Operation Selecting display range Shift concept Shifting the rangeGain window Measuring Depth, Time How to measure depth and time Noise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed Advancement synchronized with ship’s speed How the speed-dependent picture advance mode works Sounder alarm menu Fish alarm Bottom alarmBottom alarm window Fish alarm window Fish alarm B/L window Fish alarm B/L Water temperature alarm window Water temperature alarm Depth Alarm When an alarm setting is violated Sounder alarm messages and their meanings Water Temperature Graph Zero line Interpreting the Sounder DisplayBottom echo Zero line Surface noise/Aeration Fish school echoesFish school echoes Surface noise/aeration General setup menu General Setup Con’t on next Contents of general setup menu Radar display setup Radar SetupContents of general setup menu con’t from previous Radar display setup menu Contents of radar display setup menu Radar range setup menu Radar range setup Radar function key options Function key setupRadar function key Menu Item Function Function Key Radar function keys Navigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Function Default Function Key Key Label Function key setupPlotter function key menu Plotter function key options RUL Plotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Contour line menu FURUNO, NavCharts MAP chart attributesChart details menu C-MAP Cntour Line soft key Contents of chart details menu C-MAP Depth info menu C-MAP Depth Info soft key Data box menu Data Boxes Setup Hot page setup screen, Hot Page Setup HOT Navigation data source Navigator SetupContents of nav setup menu GPS setup menu Contents of GPS setup menu GPS receiver setup Contents of GPS setup menu con’t from previous Contents of GPS sensor settings menu con’t from previous Contents of Waas Setup menu Waas Setup TD setup menu TD display setupDisplaying Loran C TDs Loran GRI & station pair window Decca chain and station pair window Displaying Decca TDs Nav data setup window Nav Data Display SetupNav data setup screen On next Sounder SetupSystem setup TVG Sounder system setup menu description con’t from previous Sensor setup menu settings Sensor setupSensor setup menu Default basic ranges Sounder range setup menuSounding range, zoom range, bottom lock range Zoom range and bottom-lock ranges Sounder function key options Sounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Memory card messages Memory card messages Load data menu Playing back data from a memory card Uploading, Downloading Data Setting communication software on the PCUploading or downloading data Upload and download menus Waypoint data format Baud rate windowWaypoint data format Characters available for comment End of sentence Route data menuRoute comment data format Loading Waypoint Data from Yeoman Receive data menu Receiving Data Via Network EquipmentHost name window Marks & lines window Select sentence menu Outputting Data Through the Network Maintenance program Preventive MaintenanceReplacement of Battery Trackball Maintenance Replacement of Fuse General troubleshooting Simple TroubleshootingRadar troubleshooting Radar Plotter Plotter troubleshooting Sounder Sounder troubleshooting Memory I/O test Diagnostics Display unit test results Display unit testGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test results ARP test results Network sounder test Requires Network Sounder ETR-6/10NNetwork sounder test results Test patterns Test pattern Screen for testing keyboard, remote controller Keyboard, remote controller test GPS status display GPS Status Display Windows for clearing memory Clearing MemoriesMemory clear menu Error messages Error Messages This page is intentionally left blank Menu key Menu Overview Appendix LAT/LON Format DD MM. MM’ DD MM. MMM’ DD MM. MMMM’ 4800 Plotter Chart Border Line ON, OFF Speed 010.0 kt 0-999.9 kt Temperature Graph ON, OFF Radar Alarms Alarm keyPlotter Alarms Sounder Alarms Geodetic Chart List World Time Chart V E Icons Model 1833/1933/1943 Specifications of Marine Radar E3502S01D Plotter Function Coating Color Index-1 Index Index Index-2 Messages Index-3 Index-4 Presentation mode Waypoints Index-5