Furuno 1933, 1943, 1833 Activating/deactivating ARP, TTM, ARP setup menu, ARP target info window

2. RADAR OPERATION

2.26.1Activating/deactivating ARP, TTM

1.Press the [MENU] key followed by the ARP SETUP soft key to show the ARP SETUP menu.

ARP TARGET INFO INTERNAL ARP

CANCEL ALL TARGETS NO

ARP VECTOR MODE

TRUE

ARP VECTOR TIME

30minutes

HISTORY INTERVAL OFF

CPA

OFF

TCPA

30seconds

AUTO ACQUISITION AREA OFF

TARGET ID NUMBER OFF

ARP SETUP

EDIT

RETURN

ARP setup menu

2.Select ARP TARGET INFO, then press the EDIT soft key to show the ARP target info window.

ARP TARGET INFO

▲°￿

§INTERNAL ARP EXTERNAL ARP

OFF

▼

ARP target info window

3.Select INTERNAL ARP, EXTERNAL ARP or OFF as appropriate. INTERNAL ARP: The radar source must be an ARP-equipped Model 1800/1900 series NavNet radar. Select this item also for a NavNet unit being fed ARP targets.

EXTERNAL ARP: Receive TTM data sentence via NMEA or NETWORK port. Target tracks are shown but targets cannot be acquired.

OFF: Turns off the ARP or TTM display.

4.Press the ENTER soft key.

5.Press the [MENU] key to close the menu.

2-36