3. PLOTTER OPERATION

3.6.5Erasing track

This paragraph shows you how to erase own ship’s track and target tracks. You can erase own ship’s track collectively and by area.

Erasing own ship track by area

You can erase own ship’s track by area as below.

1.Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu.

ERASE ALL TRACKS

ERASE TRACKS BY AREA

ERASE TARGET TRACKS

ERASE ALL MARKS/LINES

ERASE MARKS BY AREA

ERASE

EDIT

SHIP’S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

RETURN

Erase menu

2.Use the trackball to select ERASE TRACKS BY AREA, then press the EDIT soft key. The menu is erased and the plotter display appears.

3.Use the trackball to place the cursor at the top left-hand corner of the area which you want to erase track from.

4.Push the START soft key or the [ENTER] knob.

5.Move the cursor to the bottom right-hand corner of the area which you want to erase track from.

6.Push the END soft key or the [ENTER] knob. You are asked if you are sure to delete the track.

7.Push the [ENTER] knob to delete the track selected.

8.Press the [MENU] key twice to close the menu.

3-22

Page 108
Image 108
Furuno 1943, 1933, 1833 manual Erasing track, Erasing own ship track by area, Erase menu