Furuno 1833, 1943, 1933 manual Following a route, Selecting the route to follow

3. PLOTTER OPERATION

3.10.4Following a route

Selecting the route to follow

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key to open the route list.

4.Select a route.

5.Press the GOTO soft key to show the plotter display. The cursor is on the waypoint nearest own ship.

FISH	359.2° M 104.5° M	GOTO
	83.2nm 10.0 kt	ROUTE

16.0 nm

WP-002

FISH

WP-001

CRAB

GOTO

WPT

RVRSE

ROUTE

RETURN

Plotter display, route selected as destination

6.Operate the trackball to place the cursor on the waypoint or leg in the route from where to start navigating the route.

7.Press the GOTO WPT or FOLLOW LEG soft key, depending on the action taken at step 6.

A line connects between own ship and all waypoints. The arrows on the lines show the direction to traverse the route.

Navigating waypoints in reverse order

Press the RVRSE ROUTE soft key followed by the [ENTER] knob to navigate waypoints in reverse order. The arrows on the route line point in the direction selected.

3-48