Trip alarm window | Furuno 1833, 1943, 1933 specs

3. PLOTTER OPERATION

3.11.7Trip alarm

The trip alarm informs you when you have traveled a certain distance.

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select TRIP ALARM.

3.Press the EDIT soft key to show the trip alarm window.

TRIP ALARM

▲°

§ON 0000.0nm

OFF

▼

Trip alarm window

4.Select ON or OFF as appropriate.

5.For ON, use the trackball and the [ENTER] knob to enter alarm setting: Operate the trackball to select digit; rotate the [ENTER] knob to set value.

6.Press the ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to finish.

3-57

Image 143

Furuno 1833, 1943, 1933 manual Trip alarm window

Contents

Marine Radar 00080918601 Keep heater away from equipment Furuno agent or dealer about replacementDo not open the equipment Do not disassemble or modify the equipment Table of Contents 11.6 Iii Plotter Operation Video Sounder Operation Customizing Your Unit Vii MAINTENANCE, Troubleshooting Viii Word to the Owner of the Model 1833/1933/1943 Marine Radar Features NavNet system NavNet system Three-or-more-unit NavNet system Two-unit NavNet systemTwo-unit NavNet system Xii What is WAAS? Operational Overview Control panel Operating ControlsDisplay unit controls Overview of display unit controls Radar display Soft keysDisplay unit Trackball Enter knob Alphabet, symbol, numericEnter knob Numerics Remote controller Remote controller Display unit Inserting a Chart CardChart card and card remover Startup sequence Turning the Unit On/Off Display brilliance and panel brilliance windows Brilliance adjustment soft keysDisplay brilliance, panel brilliance Brilliance boost Economy mode Screen type and available display screen Selecting a DisplayDisplay modes Display screens Radar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination screens Radar source and sounder source windows Selecting image sourceSelect source menu Cursor, cursor data Trackball, Cursor MOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Temporarily erasing a data box Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Function keys Function KeysExecuting a function NavNet display unit-generated echoes Simulation setup menuSimulation Display Radar Plotter NavNet radar antenna-generated echoes Sounder Radar Display Radar Operation Transmitting, Stand-by TuningAdjusting the Gain Tuning window Gain sensitivity window Gain adjustment soft keys How the A/C SEA works Adjusting the A/C SEASEA setting window Reducing Sea Clutter Reducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Pulselength Signal process soft keys Radar display soft keys Presentation ModeSelecting a presentation mode Head-up H-UP Head-up presentation modeCourse-up presentation mode Description of presentation modes True motion TR-M North-up presentation modeTrue motion presentation mode North-up N-UP Measuring range by range rings Measuring the Range Measuring range by cursor How to measure range to a target with the cursor EBL/VRM soft keys How to measure range with the VRMMeasuring range by VRM Moving EBL/VRM data boxes Erasing a VRM, VRM indicationErasing EBL/VRM data boxes Hiding EBL/VRM data boxes Measuring bearing by EBL How to measure bearing with the EBLMeasuring the Bearing Measuring bearing by cursor Erasing an EBL, EBL indication Erasing the Heading Line, North Marker Reducing Noise Interference Radar interference Rejecting Radar Interference Zoom ZoomZooming in on radar targets Zooming in on ARP, TTM targets Shifting the picture manually Shifting the PictureManual shift Target no. selection window Automatic shift Setting automatic shift maximum speedAuto ship speed setting window Automatic shift Predicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range and bearing between two targets Measuring range & bearing between two targets Trail soft keys Echo TrailsTrail time Sample echo trails Multitone and monotone trails Starting echo trailsTrail gradation Trail mode window Echo trail mode Types of echo stretch Echo Stretch Effect of echo averaging Echo Averaging Target soft keys Outputting TLL Data How to set a guard alarm zone Guard AlarmSetting a guard alarm zone Cancelling the guard alarm When the alarm is violated… Turning on/off watchman Setting watchman stand-by intervalWatchman How watchman works Second-trace echoes Suppressing Second-trace Echoes Waypoint marker Waypoint Marker Display accuracy is affected by the following 26 ARP, TTM Operation ARP target info window ARP setup menuActivating/deactivating ARP, TTM Automatic acquisition ARP plot symbolsAcquiring and tracking targets ARP Manual acquisition ARP target number Displaying target number ARP, TTMAutomatic acquisition area Terminating tracking of all targets Cancel all targets windowTerminating tracking of ARP targets Terminating tracking of selected targets Vector reference, vector time Setting vector attributes ARPWhat is a vector? Plot interval window Displaying past position ARPPast position displays ARP target data 26.7 ARP, TTM target data CPA window 26.8 CPA/TCPA alarm ARP Lost target mark Lost target alarm ARPCanceling a lost target Tcpa window Minimum and maximum ranges Interpreting the Radar DisplayGeneral Bearing accuracy Radar resolutionBearing resolution Range resolution Sidelobe echoes False echoesMultiple echoes Multiple echoes Shadow sectors Virtual imageVirtual image Shadow sectors Sart Search and Rescue Transponder Appearance of Sart signal on the radar display General remarks on receiving Sart General procedure for detecting Sart response Rain control Appearance of racon signal on the radar displayRacon Radar Beacon SEA control This page is intentionally left blank Full-screen plotter display Plotter DisplaysFull-screen plotter display 001WPT Contents of nav data windowNav data window Compass display Compass display Soft keys Reading the XTE cross-track error monitorSetting the range for the XTE monitor XTE range setting window Highway display Highway display Nav data displays Nav data display North-up Plotter display, north-up mode Auto course-up display Course-upAuto course-up Plotter display, course-up mode, destination set Shifting the Display Chart ScaleCharts scales Chart icons and their meanings Chart CardsChart card overview Indices and chart enlargement Chart symbols Furuno and NavCharts chartsWhen a chart cannot be displayed Chart symbols Example of buoy, lighthouse data Data for aids to navigationLighthouse mark Plotter display, showing port service display Port service icons NavCharts only Example of caution area window MAP chartsCursor and data display Objects window Object windows Icon dataLighthouse icon Objects window Sample lighthouse dataTide information Date window Tide window Track control menu Working with TrackDisplaying track Own ship track Target track Stopping, restarting plotting of own ship track Track plotting interval Track plotting method and interval for own ship trackTrack plotting method Interval window Track memory window Changing own ship track/mark distribution setting Erase menu Erasing trackErasing own ship track by area Erasing all target tracks Erasing all own ship track Mark shapes Marks, LinesEntering a mark, line Changing mark attributes Marks shape window Selecting line type Erasing an individual line Erasing marks, linesLines style window Erasing an individual mark Erasing all marks, lines Entering a waypoint with the cursor WaypointsEntering waypoints Entering a waypoint at own ship position Waypoint ark shape selection window Select Mark Entering a waypoint by range and bearing Editing waypoint data from the waypoint list Editing waypoint dataEntering a waypoint from the waypoint list Alphanumeric and local waypoint lists Plotter display Editing a waypoint from the plotter display Erasing a waypoint from the waypoint list Erasing waypointsErasing a waypoint directly from the plotter display Erasing a waypoint from the menu Chart details menu Changing waypoint mark size FURUNO, NavCharts Alphanumeric list Searching waypoints Route menu RoutesCreating routes Entering a route with existing waypoints Entering a route with the cursor Save route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connect route window Connecting routes Waypoint list for editing a route local list Inserting a waypoint in a routeInserting a waypoint from the route list Edit route menu Inserting a waypoint in an intermediate location on a route Inserting a waypoint from the plotter display Removing a waypoint from the plotter display Removing waypoints from a routeErasing routes Removing a waypoint from the route list Go to method window NavigationNavigating to a quick point Selecting quick point entry method Selecting a waypoint from the waypoint list Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the plotter display Port services and sample port list Navigating to ports, port services NavCharts only Sample filling station locations southern Italy Navigating waypoints in reverse order Following a routeSelecting the route to follow Plotter display, route selected as destination Log display Example of when to restart navigationRestarting navigation Select speed for ETA window Setting speed for ETA calculationSwitching waypoints Automatic waypoint switching methods Cancelling route navigation Audio alarm window AlarmsAudio alarm on/off Plotter alarm menu Arrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works XTE alarm window XTE Cross-Track Error alarmSpeed alarm How the XTE alarm works Proximity mark Proximity alarmProximity alarm window Trip alarm window Trip alarm Plotter alarm menu, Alarm information Plotter alarm messages and their meanings Alarm messages General setup menu, Resetting Trip Distance Underwater conditions and video sounder display Principle of Operation Selecting a sounder display Display mode windowSounder Displays Single-frequency display 114Description of sounder displays Marker-zoom display Dual-frequency displayDual-frequency display KHz picture Sounding area and transmission frequency Bottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom discrimination display Bottom-lock displayBottom-lock display plus normal sounder display Bottom discrimination display Scope display Selecting screen split method in combination displaysScope display display only Types of automatic sounder modes How to enable automatic sounder operationAutomatic Sounder Operation How the automatic sounder works Selecting display range Selecting the manual modeAdjusting the gain Manual Sounder Operation Shift concept Shifting the rangeGain window Measuring Depth, Time How to measure depth and time Noise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed Advancement synchronized with ship’s speed How the speed-dependent picture advance mode works Sounder alarm menu Fish alarm window Bottom alarmFish alarm Bottom alarm window Fish alarm B/L window Fish alarm B/L Water temperature alarm window Water temperature alarm Depth Alarm When an alarm setting is violated Sounder alarm messages and their meanings Water Temperature Graph Zero line Interpreting the Sounder DisplayZero line Bottom echo Surface noise/aeration Fish school echoesSurface noise/Aeration Fish school echoes General setup menu General Setup Con’t on next Contents of general setup menu Radar display setup menu Radar SetupRadar display setup Contents of general setup menu con’t from previous Contents of radar display setup menu Radar range setup menu Radar range setup Radar function key options Function key setupRadar function key Menu Item Function Function Key Radar function keys Navigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Plotter function key options Function key setupFunction Default Function Key Key Label Plotter function key menu RUL Plotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Cntour Line soft key MAP chart attributesContour line menu FURUNO, NavCharts Chart details menu C-MAP Contents of chart details menu C-MAP Depth info menu C-MAP Depth Info soft key Data box menu Data Boxes Setup Hot page setup screen, Hot Page Setup HOT Navigation data source Navigator SetupContents of nav setup menu GPS setup menu Contents of GPS setup menu GPS receiver setup Contents of GPS setup menu con’t from previous Contents of GPS sensor settings menu con’t from previous Contents of Waas Setup menu Waas Setup Loran GRI & station pair window TD display setupTD setup menu Displaying Loran C TDs Decca chain and station pair window Displaying Decca TDs Nav data setup window Nav Data Display SetupNav data setup screen On next Sounder SetupSystem setup TVG Sounder system setup menu description con’t from previous Sensor setup menu settings Sensor setupSensor setup menu Zoom range and bottom-lock ranges Sounder range setup menuDefault basic ranges Sounding range, zoom range, bottom lock range Sounder function key options Sounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Memory card messages Memory card messages Load data menu Playing back data from a memory card Upload and download menus Setting communication software on the PCUploading, Downloading Data Uploading or downloading data Characters available for comment Baud rate windowWaypoint data format Waypoint data format End of sentence Route data menuRoute comment data format Loading Waypoint Data from Yeoman Marks & lines window Receiving Data Via Network EquipmentReceive data menu Host name window Select sentence menu Outputting Data Through the Network Maintenance program Preventive MaintenanceReplacement of Battery Trackball Maintenance Replacement of Fuse Radar Simple TroubleshootingGeneral troubleshooting Radar troubleshooting Plotter Plotter troubleshooting Sounder Sounder troubleshooting Memory I/O test Diagnostics GPS receiver test results Display unit testDisplay unit test results GPS sensor test Requires GPS Receiver GP-310B/320B ARP test results Network sounder test Requires Network Sounder ETR-6/10NNetwork sounder test results Test patterns Test pattern Screen for testing keyboard, remote controller Keyboard, remote controller test GPS status display GPS Status Display Windows for clearing memory Clearing MemoriesMemory clear menu Error messages Error Messages This page is intentionally left blank Menu key Menu Overview Appendix LAT/LON Format DD MM. MM’ DD MM. MMM’ DD MM. MMMM’ 4800 Plotter Chart Border Line ON, OFF Speed 010.0 kt 0-999.9 kt Temperature Graph ON, OFF Sounder Alarms Alarm keyRadar Alarms Plotter Alarms Geodetic Chart List World Time Chart V E Icons Model 1833/1933/1943 Specifications of Marine Radar E3502S01D Plotter Function Coating Color Index-1 Index Index Index-2 Messages Index-3 Index-4 Presentation mode Waypoints Index-5