Furuno 1833, 1943, 1933 manual Displays for entry of time, distance interval

3. PLOTTER OPERATION

6.Choose how to record points for your route, by time, by range or manual entry, by pressing BCKTRK TIME, BCKTRK RANGE or MANUAL soft key as appropriate. For manual entry, go to step 8. For BCKTRK TIME, BCKTRK DIST one of the following displays appears.

TIME INTERVAL

00h01m

DISTANCE INTERVAL

00.1nm

(When selecting BCKTRK TIME.) (When selecting BCKTRK DIST.)

Displays for entry of time, distance interval

7.Use the trackball to select digit; rotate the [ENTER] knob to set value. Press the START LOG and RETURN soft keys followed by the [MENU] key to close the menu. At this moment, a voyage-based route will be created.

8.For manual entry of waypoints, do the following:

a)Press the [SAVE/MOB] key momentarily to enter a waypoint mark at own ship position. A new waypoint is created under the youngest empty waypoint number and added to the route. (At this time you may close the SAVE ROUTE screen by pressing the RETURN soft key followed by the [MENU] key.)

b)Repeat step a) as necessary. 35 waypoints may be entered.

To stop recording waypoints and save the route

You can stop recording waypoints and save the route as shown in the procedure below. When 35 waypoints have been entered the message “Total 35 WPTS have been already registered in the route. Stop creating voyage-based route.” is displayed. In this case, save the route as shown below.

1.Press the [MENU] key followed by the WAYPOINTS/ROUTES and CREATE VOYAGE-BASED ROUTE soft keys.

2.Press the FINISH LOG soft key to stop recording waypoints and save the route.

3.Press the [MENU] key to close the menu.

3-39