Contents
1 | General Description | 5 | |
2 | Signal Path and Control Circuitry | 6 | |
3 | Block Description | 7 | |
| 3.1 | Block A | 7 |
| 3.2 | Block B | 7 |
| 3.3 | Block C | 7 |
| 3.4 | Block D | 7 |
4 | 7 | ||
5 | Installing the Software GUI and USB Driver | 8 | |
6 | ChronosGUI | 9 | |
| 6.1 | Using | 9 |
| 6.2 | Manual PLL Block Selection (Advanced Control) | 11 |
7 | Configuring the Board | 13 | |
| 7.1 | Programming and Testing Configuration (USB Cable | 13 |
| 7.2 | Programming Configuration (USB Cable Attached) | 13 |
7.3Testing Configuration from a Saved Configuration (with USB Cable Removed After
| Programming) | 13 |
8 | Schematics and Layout | 14 |
Important Notices | 20 | |
SCAU020 | Table of Contents | 3 |
