www.ti.com
Installing the Software GUI and USB Driver
5Installing the Software GUI and USB Driver
The CDCE421EVM software can be installed on a PC running the Microsoft Windows® 2000 operating system or higher (including Windows XP® ).
To start software installation, run the ChronosSetup.msi file (available on the CD shipped with the EVM). Figure 3 appears. Be sure to note the installation folder; the USB driver must be installed in the same after setup completes and the USB cable is connected. See Figure 4.
Figure 3. Software Installation Screen
Note the program file location; the USB controller driver is in the same location.
Figure 4. Installation Prompt
8 | SCAU020 |
