Samsung HC-S4755W Connecting to a Cable Box that Descrambles Some Channels, Between an Output

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

œThis terminal might be labeled “ANT IN,” “VHF IN,” or simply, “IN.”

Cable Box

2

Connect this cable to a
two-way splitter.
Connect a coaxial cable	Incoming Cable
between an OUTPUT	Splitter
terminal on the splitter
and the IN terminal on
the cable box.

3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the	Incoming Cable
cable box and the B–IN
	Splitter
terminal on the A/B

switch. Cable Box

Cable Box

RF (A/B)

Switch

4

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on

Incoming Cable

the RF (A/B) switch.	Splitter	RF (A/B)
	Cable Box	Switch

5

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the “ANT 2 IN (Cable)” on the panel.

Splitter	RF (A/B)	TV Rear Panel
Cable Box	Switch

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 17