Problem Possible Cause Solution | Top Innovations MODEL MC1860

IMPORTANT SAFEGUARDS

WARNING: To reduce the risk of electric shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature.

10.MC1860 Steam Vacuum is only meant to collect small amounts of moisture, such as that produced during the steaming process. DO NOT use it to vacuum wet surfaces, or any volume of liquid.

11.Burns could occur from touching hot metal parts, hot water or steam. Use care when you turn a steam appliance upside down - there may be hot water in water reservoir.

12.Steam hose may become hot during use. Use caution when handling to avoid burns or other injury.

13.MC1860 Steam Vacuum is only meant to be used with recommended MC1860 accessories. Other types of attachments are not to be used with Steam Vacuum. Doing so may cause injuries or damage to unit.

14.Nozzle and attachments become hot during use. To avoid injuries, DO NOT touch nozzle while using this appliance. DO NOT attempt to change attachments while unit is emitting steam.

15.When filling your Steam Vacuum with water, DO NOT fill water reservoir with more than 20 oz. of water. Only water should be used in unit. Other cleaning agents will damage unit and can cause injuries.

16.Always disconnect appliance from electrical outlet when filling with water or emptying, and when not in use.

17.DO NOT operate unit if steam opening is blocked. Should this occur, immediately cease usage and unplug from electrical outlet.

18.Store your MC1860 Steam Vacuum in a cool, dry place.

SAVE THESE INSTRUCTIONS!

FOR HOUSEHOLD USE ONLY

TROUBLESHOOTING & CUSTOMER SUPPORT

PROBLEM	POSSIBLE CAUSE	SOLUTION

Unit fails to operate.	Unit is not plugged in.	Plug into electrical
		outlet.

	Household Circuit Breaker /	Reset Circuit Breaker /
	Ground Fault Interrupter has	Ground Fault Interrupter, or
	tripped or blown a fuse.	replace fuse. If you need
		assistance, contact a licensed
		electrician.

Unit fails to steam, but	Water reservoir is empty.	Refill water reservoir using
Vacuum Mode functions		procedures on page 9 of this
correctly.		manual.

	Mineral build-up in unit.	Follow Removing Mineral
		Build-Upprocedure on page
		12 of this manual.

	Boiler has not yet completely	Wait for the green steam
	heated.	ready light to illuminate
		before attempting to steam.

Steam output is intermittent.	Mineral build-up in unit.	It is normal for unit to
		periodically stop steaming
		for a few seconds. If steam
		stays off for longer periods,
		follow Removing Mineral
		Build-Upprocedure on page
		12 of this manual.

Unit is emitting excess water.	Water condensation in Hose.	Point Steam Nozzle towards
		sink, tub or ground and shake
		while depressing Steam
		Trigger. Continue until
		excess water is released.

Vacuum suction strength is	Blockage in Hose.	Attempt to dislodge blockage
weak or non-functional		if you can see it. If not,
		contact our Customer Service
		Department.

	Water Filtration Chamber is	Empty Water Filtration
	full / overflow lock has	Chamber.
	engaged.

Top Innovations, Inc.

MODEL MC1860 specifications

The MODEL MC1860 is a cutting-edge piece of equipment that has garnered attention for its innovative design and advanced technologies. As industries continue to evolve, the need for reliable and efficient machinery becomes paramount. The MC1860 meets these demands with a plethora of features tailored to enhance performance and productivity.

One of the primary features of the MODEL MC1860 is its state-of-the-art processing power. Equipped with a high-efficiency engine, it delivers superior performance while optimizing fuel consumption. This not only reduces operational costs but also minimizes environmental impact, making it a green choice for modern businesses.

The MC1860 incorporates advanced automation technologies, allowing for seamless operation and reduced manual intervention. With intelligent control systems, it can dynamically adapt to varying workloads, ensuring that it maintains peak efficiency at all times. This level of automation not only boosts productivity but also enhances safety by reducing the risk of human error.

For users focusing on precision, the MODEL MC1860 includes advanced sensor technology. These sensors provide real-time data monitoring, allowing operators to make informed decisions and adjustments. The integration of these sensors enhances the machine’s ability to maintain optimal performance and can be particularly beneficial in applications requiring high levels of accuracy.

Ergonomics and user-friendly design are also key characteristics of the MC1860. The machine features an intuitive interface that simplifies operation, ensuring that even those with minimal training can operate it effectively. Additionally, the design includes accessibility features that enable easy maintenance, reducing downtime and increasing overall efficiency.

Moreover, the MODEL MC1860 is built with durability in mind. Constructed from high-quality materials, it withstands harsh working conditions and extends its lifespan significantly. The robust design ensures that it remains functional and reliable, even in demanding environments.

In conclusion, the MODEL MC1860 stands out in the market due to its innovative features, including superior processing power, advanced automation, and real-time monitoring capabilities. Its focus on ergonomics, user-friendliness, and durability further solidifies its place as a top choice for industries seeking to enhance efficiency and productivity. As technology advances, the MC1860 represents a significant leap forward, meeting contemporary demands while preparing for future challenges.

IMPORTANT SAFEGUARDS

PROBLEM

POSSIBLE CAUSE

SOLUTION

Follow Removing Mineral

MODEL MC1860 specifications