Operating Steam Vacuum, Vacuum Mode | Top Innovations MODEL MC1860

USING THE STEAM VACUUM

OPERATING STEAM VACUUM

NOTE: Be sure that water reservoir and Water Filtration Chamber have already been filled and that all desired accessories are connected before following these steps.

1.Plug power cord into a convenient electrical outlet (make sure to first remove plastic cover that protects plugs during shipping).

CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature in any way.

2.Set Main Control Switch to desired mode (vacuum mode or steam mode) (FIGURE 7).

FIGURE 7

VACUUM MODE

1.When set to vacuum mode, unit suction will begin automatically. You are immediately ready to begin your vacuuming tasks.

2.While vacuuming, it is possible to alter the force of suction, by using switch on top of Handle. Move it forward to increase suction power, and move it backwards to decrease suction power. This is useful for when vacuuming rugs or other materials on which you may not want to use maximum.

3.As you vacuum, it may become necessary to stop and empty Water Filtration Chamber. Simply follow these steps:

-Unhook locks and remove Water Filtration Chamber cover,

-Remove Water Filtration Chamber (there are no locks holding it in place; simply pull it out),

-Remove filter

-Empty Water Filtration Chamber into toilet (for dirty water) or trash can

-Replace filter and refill Water Filtration Chamber with water (10 oz.)

-Set Water Filtration Chamber back in place

-Replace Water Filtration Chamber cover and re-latch locks

NOTE: It is recommended that you remove and clean filter in Water Filtration Chamber after several uses. Simply remove it and rinse thoroughly with warm water, then replace it. After approximately 6 months of regular use, you may wish to replace this filter to maintain optimum filtration. Refer to page 14 of this manual for information on obtaining replacement filters.

10	Top Innovations, Inc.

ASSEMBLING THE STEAM VACUUM

CONNECTING / DISCONNECTING HOSE

1.Align connector end of Hose with Hose Connection Base as shown (FIGURE 1), and insert it. Press in until two locking tabs on Hose snap through two holes on sides of Hose Connection Base.

2.To remove Hose from Hose Connection Base, press in on two locking tabs and firmly pull Hose out of Hose Connection Base.

FIGURE 1

CONNECTING ATTACHMENTS TO

VACUUM / STEAM NOZZLES

1.Slide Open/Close lock on Squeegee Head, Steam Jet Nozzle or Vacuum Head to “Open” position.

2.Align Squeegee Head, Steam Jet Nozzle, Vacuum Head or Small Vacuum Head with Vacuum/Steam Nozzles as shown (FIGURE 2), and press firmly onto Vacuum/Steam Nozzles. Note that Small Vacuum Head only fits onto Vacuum Nozzle, and does not have an Open/Close lock.

3.Slide Open/Close lock on Squeegee Head, Steam Jet Nozzle or Vacuum Head to “Close” position.

FIGURE 2

Top Innovations, Inc.

MODEL MC1860 specifications

The MODEL MC1860 is a cutting-edge piece of equipment that has garnered attention for its innovative design and advanced technologies. As industries continue to evolve, the need for reliable and efficient machinery becomes paramount. The MC1860 meets these demands with a plethora of features tailored to enhance performance and productivity.

One of the primary features of the MODEL MC1860 is its state-of-the-art processing power. Equipped with a high-efficiency engine, it delivers superior performance while optimizing fuel consumption. This not only reduces operational costs but also minimizes environmental impact, making it a green choice for modern businesses.

The MC1860 incorporates advanced automation technologies, allowing for seamless operation and reduced manual intervention. With intelligent control systems, it can dynamically adapt to varying workloads, ensuring that it maintains peak efficiency at all times. This level of automation not only boosts productivity but also enhances safety by reducing the risk of human error.

For users focusing on precision, the MODEL MC1860 includes advanced sensor technology. These sensors provide real-time data monitoring, allowing operators to make informed decisions and adjustments. The integration of these sensors enhances the machine’s ability to maintain optimal performance and can be particularly beneficial in applications requiring high levels of accuracy.

Ergonomics and user-friendly design are also key characteristics of the MC1860. The machine features an intuitive interface that simplifies operation, ensuring that even those with minimal training can operate it effectively. Additionally, the design includes accessibility features that enable easy maintenance, reducing downtime and increasing overall efficiency.

Moreover, the MODEL MC1860 is built with durability in mind. Constructed from high-quality materials, it withstands harsh working conditions and extends its lifespan significantly. The robust design ensures that it remains functional and reliable, even in demanding environments.

In conclusion, the MODEL MC1860 stands out in the market due to its innovative features, including superior processing power, advanced automation, and real-time monitoring capabilities. Its focus on ergonomics, user-friendliness, and durability further solidifies its place as a top choice for industries seeking to enhance efficiency and productivity. As technology advances, the MC1860 represents a significant leap forward, meeting contemporary demands while preparing for future challenges.