Operating HEAVY-DUTY Steam Cleaner

USING THE

HEAVY-DUTY STEAM CLEANER

NOTE: Be sure that Water Reservoir has already been filled and that all desired accessories are connected before following these steps.

1.Plug grounded power cord into a convenient electrical outlet.

CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature in any way.

2.Switch Lighted On/Off Switch to “On” position. Steam Ready Light will immediately illuminate.

NOTE: Steam Ready Light is illuminated while boiler is heating.

3.Steam Ready Light will deactivate in 2-8 minutes (depending on how much water is in Water Reservoir), indicating that boiler is heated and unit is ready to begin steaming.

4.Direct Steam Jet Nozzle (or other accessories) towards surface you desire to steam, and press Steam Button. To sanitize surfaces, point Steam Jet Nozzle, press Steam Button and hold approximately 1/2 inch from surface for at least 5 seconds. This will insure that you have killed germs and bacteria.

CAUTION: Always be sure that Steam Jet Nozzle and other accessories are pointed in a safe direction (away from yourself, other people, pets, and plants) before pressing Steam Button.

5.Keep Steam Button depressed for a continuous flow of steam. You may also slide the Steam Lock Switch forward while depressing the Steam Button to lock the Steam Button down. This will let you have a continuous flow of steam without having to hold down the Steam Button.

6.Using a slight back-and-forth motion over the area you are steaming will further enhance the cleaning process. Wipe steamed areas with a clean cloth to remove loosened dirt and grime. Wiping the area while it is still wet is recommended, but use caution when wiping surfaces such as metal that may still be hot.

NOTE: During use, the Steam Ready Light may illuminate. This is normal. If you notice a drop in steam pressure, release Steam Button until Steam Ready Light deactivates once again.

7.Once steaming tasks are complete, immediately set Lighted On/Off Switch to “Off” position and unplug grounded power cord from electrical outlet. Follow steps under Proper Storage procedure on page 11 of this manual.

ASSEMBLING THE

HEAVY-DUTY STEAM CLEANER

ATTACHING CARRY HANDLE

1.Insert Carry Handle into Carry Handle hole on top of unit. Please refer to illustration for assistance with proper alignment (FIGURE 1).

2.Use enclosed magnetic screw driver and screw to securely fasten Carry Handle to unit.

FIGURE 1

ATTACHING MAIN ACCESSORIES

WARNING: Do not try to connect accessories while unit is emitting steam.

This section applies to the Steam Jet Nozzle, Squeegee, Floor Brush, Extension Wands and Triangle Brush.

1.Depress red lock/release button on main steam nozzle (FIGURE 2-A).

2.While still depressing lock/release button, slide Steam Jet Nozzle or other accessory over this button, so that rectangular hole in attachment aligns with lock/release button (FIGURE 2-B).

3.Once lock/release button and rectangular hole are properly aligned, button should click through hole and into place.

4.To remove Steam Jet Nozzle or other accessory, press in red lock/release button and pull attachment off of main steam nozzle.

FIGURE 2

Top Innovations, Inc.

MC1275 specifications

The Top Innovations MC1275 is a cutting-edge device that has emerged as a top contender in the realm of modern machinery, bringing advanced features and innovative technologies to both consumers and professionals alike. Designed with a focus on efficiency and user-friendliness, the MC1275 seamlessly integrates into various applications, setting a new standard in its category.

At the heart of the MC1275 is its powerful and efficient engine, which not only ensures high performance but also significantly reduces operational costs. The device is built with energy efficiency in mind, leading to lower energy consumption while maintaining optimal output. This is especially beneficial for industries striving to achieve sustainability without compromising productivity.

One of the standout features of the MC1275 is its state-of-the-art digital interface. This user-friendly control panel boasts intuitive navigation and programmable settings, allowing operators to customize performance parameters according to specific tasks. The advanced Bluetooth connectivity also allows for remote monitoring and control, providing the flexibility to manage operations from a distance. This feature is particularly useful in complex environments where close supervision is not always feasible.

In addition to its technological advancements, the MC1275 is designed with durability in mind. Constructed from high-quality materials, it withstands the rigors of daily use in demanding conditions. The robust design reduces downtime caused by maintenance issues, allowing businesses to maximize their productivity.

The MC1275 is also equipped with cutting-edge safety features, including emergency shut-off systems and overload protection mechanisms. These not only ensure the safety of the operators but also contribute to the longevity of the machine itself.

Furthermore, Top Innovations has prioritized versatility in the MC1275’s design. With a range of customizable attachments, this device can adapt to various tasks, whether in construction, landscaping, or industrial applications. The ease of switching attachments enhances its utility, making it an invaluable tool for contractors and DIY enthusiasts alike.

In summary, the Top Innovations MC1275 is a remarkable piece of machinery that combines advanced technology, energy efficiency, and robust design. With its powerful engine, user-friendly digital interface, and versatile attachments, it sets a new benchmark for performance and reliability in its industry. This innovation not only enhances productivity but also paves the way for more sustainable operational practices in various fields.