Attaching Utility Brushes

ASSEMBLING THE

HEAVY-DUTY STEAM CLEANER

WARNING: Do not try to connect accessories while unit is emitting steam.

This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam Jet Nozzle, not to main steam nozzle.

1.Align guide tab on inside of Utility Brush (FIGURE 3-A) with groove on bottom of Steam Jet Nozzle tip (FIGURE 3-B), and firmly press Utility Brush onto Steam Jet Nozzle.

2.Press Utility Brush as far on to Steam Jet Nozzle as possible to ensure that it is properly sealed, to help prevent any steam leakage (FIGURE 4).

3.To remove Utility Brush, simply grip it firmly and pull it off of Steam Jet Nozzle.

USING THE

HEAVY-DUTY STEAM CLEANER

FILLING WATER RESERVOIR WITH WATER

1.Place Heavy-Duty Steam Cleaner on a flat, level surface.

2.Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is unplugged from electrical outlet.

3.Flip up Storage Compartment lid. Cautiously unscrew and remove Water Reservoir cap.

4.Water Reservoir should always be emptied after each use. If it was not emptied after the last use, empty it now. This will prevent over-filling.

5.Fill Measuring Cup to maximum fill line (16 oz. / 473 ml.) with water.

NOTE: To prolong the life of your Heavy-Duty Steam Cleaner, we recommend using distilled or de-mineralized water.

6.Carefully pour water from Measuring Cup into Water Reservoir through fill hole.

WARNING: Extreme caution should be used when pouring water into the Water Reservoir. Do not look directly down into fill hole when filling. Keep your free hand and any children or pets at a safe distance.

7.Depending on how long you intend to steam, you may repeat steps 5 & 6 up to two more times, to have up to a maximum of 48 oz. (1,420 ml.) of water. See chart for a comparison of the amount of water vs. approximate steam time.

FIGURE 3

ATTACHING SCRUB PAD

This section applies to the Scrub Pad. Note that Scrub Pad attaches to Steam Jet Nozzle, not to main steam nozzle.

1.Place Scrub Pad over tip of Steam Jet Nozzle, and firmly press it as far on to Steam Jet Nozzle as possible to ensure that it is properly sealed (FIGURE 5). This will help prevent any steam leakage.

2.To remove Scrub Pad, simply grip it firmly and pull it off of Steam Jet Nozzle.

FIGURE 4

FIGURE 5

8.Replace Water Reservoir cap, ensuring that it is screwed on tightly to prevent hot steam from escaping and causing injury.

9.Lower Storage Compartment lid back down.

REFILLING WATER RESERVOIR AFTER USE

If unit has been in use, always follow the safety precautions below before removing the Water Reservoir cap:

1.Allow unit to cool for 5-10 minutes.

2.Press and hold Steam Button to release all remaining steam.

WARNING: Failure to follow these precautions may result in burns from escaping steam when the Water Reservoir cap is removed.

Top Innovations, Inc.

MC1275 specifications

The Top Innovations MC1275 is a cutting-edge device that has emerged as a top contender in the realm of modern machinery, bringing advanced features and innovative technologies to both consumers and professionals alike. Designed with a focus on efficiency and user-friendliness, the MC1275 seamlessly integrates into various applications, setting a new standard in its category.

At the heart of the MC1275 is its powerful and efficient engine, which not only ensures high performance but also significantly reduces operational costs. The device is built with energy efficiency in mind, leading to lower energy consumption while maintaining optimal output. This is especially beneficial for industries striving to achieve sustainability without compromising productivity.

One of the standout features of the MC1275 is its state-of-the-art digital interface. This user-friendly control panel boasts intuitive navigation and programmable settings, allowing operators to customize performance parameters according to specific tasks. The advanced Bluetooth connectivity also allows for remote monitoring and control, providing the flexibility to manage operations from a distance. This feature is particularly useful in complex environments where close supervision is not always feasible.

In addition to its technological advancements, the MC1275 is designed with durability in mind. Constructed from high-quality materials, it withstands the rigors of daily use in demanding conditions. The robust design reduces downtime caused by maintenance issues, allowing businesses to maximize their productivity.

The MC1275 is also equipped with cutting-edge safety features, including emergency shut-off systems and overload protection mechanisms. These not only ensure the safety of the operators but also contribute to the longevity of the machine itself.

Furthermore, Top Innovations has prioritized versatility in the MC1275’s design. With a range of customizable attachments, this device can adapt to various tasks, whether in construction, landscaping, or industrial applications. The ease of switching attachments enhances its utility, making it an invaluable tool for contractors and DIY enthusiasts alike.

In summary, the Top Innovations MC1275 is a remarkable piece of machinery that combines advanced technology, energy efficiency, and robust design. With its powerful engine, user-friendly digital interface, and versatile attachments, it sets a new benchmark for performance and reliability in its industry. This innovation not only enhances productivity but also paves the way for more sustainable operational practices in various fields.