Gear Reduction Unit | Roper G12-436 specs

5.INSTRUCTIONS FOR ASSEMBLY OF A TYPE “BHB” HYDRAULIC DRIVE

1.Refer to Section 3, INSTRUCTIONS FOR PUMP ASSEMBLY, steps 1 – 5. For installing packing, refer to steps 7 – 18. For installing mechanical seal, refer to steps 28 – 38.

2.Refer to sectional drawing (Figure 7.3) for TYPE “BHB” HYDRAULIC DRIVE COUPLING ASSEMBLY.

3.Secure bracket (51) to backplate (6A, B) using four socket head cap screws (AD).

4.Install key (Z) in shaft keyway. Place coupling half (53) on drive shaft (32). Install retaining ring (45). Rotate drive shaft (32) until setscrew lines up with hole in bracket (52), then tighten setscrew.

5.Install coupling spider (55).

6.Place bracket (52) onto pilot of hydraulic motor. DO NOT secure bracket into place at this time.

7.Place coupling half (54) onto shaft of hydraulic motor to dimension shown. Rotate bracket (52) until hole in bracket lines up with setscrew on coupling half. Tighten setscrew.

8.Rotate bracket on motor to line up motor mounting holes with bracket holes. Secure bracket (52) to hydraulic motor using appropriate fasteners.

9.Secure bracket (52) to bracket (51) using six socket head cap screws (AE) and six lockwashers (AF).

10.Read and understand all safety instructions and warnings before installing and operating pump.

6.GEAR REDUCTION UNIT

ALIGNING GHB PINION SHAFT HEIGHT

Refer to Section 7, PARTS LIST.

The pinion shaft of the GHB gear reducer can be positioned at any location over a full 360°. This must be done before the gear reducer oil is added. The pinion shaft can be positioned in the following manner.

1.Loosen six hex head cap screws (W).

2.Rotate gear case (44) on six slots in cover (49).

3.If pinion shaft (42) cannot be moved to proper position at this point, remove six hex head cap screws (W) along with washers (X and Y).

4.Rotate pinion shaft to desired position. Reinstall and tighten six hex head cap screws (W) along with six flat washers (X) and six lockwashers (Y).

5.If six threaded holes in gear case (44) are not fully visible within cast slots on cover (49), gear reducer will have to be partially disassembled so that cover (49) can be rotated.

6.Slide gear case (44) off of cover (49).

7.Remove retaining ring (45) from end of pump drive shaft (32).

8.Remove drive gear (46). A gear puller may be necessary.

9.Remove four socket head cap screws (AD).

10.Rotate cover (49) 90° and reinstall and tighten four socket head cap screws.

11.Install drive gear (46) on drive shaft (32).

12.Install retaining ring (45).

13.Replace gasket (48) and slip gear case (44) complete with pinion assembly onto cover (49).

G12-436 specifications

The Roper G12-436 is a versatile and robust washing machine designed for both residential and light commercial use, known for its reliability and efficiency. This model integrates cutting-edge technologies and user-friendly features, making laundry tasks less time-consuming and more effective.

One of the standout features of the Roper G12-436 is its impressive capacity. With a large drum size, it can handle sizable loads, accommodating bedding, towels, and various garment types with ease. This capacity not only saves time by allowing users to do fewer loads but also contributes to energy efficiency by maximizing the amount of laundry processed per wash.

The G12-436 is equipped with multiple wash cycles, providing flexibility to cater to different fabric types and levels of soil. Users can choose from cycles such as delicate, heavy-duty, and quick wash, ensuring optimal care for their garments. This adaptability makes it suitable for a variety of laundry needs, from everyday clothing to more sensitive fabrics.

Another notable aspect of the Roper G12-436 is its efficient water usage. Featuring a high-efficiency design, it utilizes advanced technology to minimize water consumption while still achieving excellent cleaning results. This is particularly advantageous for eco-conscious users looking to reduce their environmental footprint.

In terms of control, the G12-436 features an intuitive electronic control panel, allowing users to select wash settings easily. LED indicators guide users through the wash cycle, ensuring clarity and convenience throughout the process.

Moreover, the machine boasts powerful spin speeds that enhance drying efficiency. By extracting more moisture during the spin cycle, the G12-436 enables clothes to dry faster, whether air-drying or using a dryer. This feature streamlines the laundry process, making it a practical choice for busy households.

Durability is another hallmark of the Roper brand, and the G12-436 is no exception. Constructed with high-quality materials, it is built to withstand the rigors of regular use, ensuring longevity and consistent performance over time.

In summary, the Roper G12-436 is a well-rounded washing machine that combines capacity, efficiency, and ease of use. With its range of wash cycles, water-conserving technology, and robust construction, it stands out as an excellent investment for anyone looking to simplify their laundry routines without compromising on quality.