Shindaiwa GP344, X7506720300 Handling Fuel, Filling the fuel tank, Mixing Instructions, After use

Page 7

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the re- quired amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-

off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immedi- ately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Minimize the risk of injury to yourself and others Contents! Always wear eye and hearing protectionWhen operating this unit EnglishIntroduction ContentsOperational and warning labels Safety Various components. Understanding SpecificationsSpecifications are subject to change without notice Unit DescriptionEmission Control Exhaust & Evaporative AssemblyPrior to Assembly Install the Suction and Discharge HosesPriming Mixing FuelAfter use Handling FuelFilling the fuel tank Mixing InstructionsStarting a Flooded Engine Starting the EnginePressing the primer bulb will not flood Engine with fuel If the engine does not startDischarge Quantity liters per minute Stopping the EngineOperation Operating Tips for Maximum PerformanceMaintenance 10/15-Hour Maintenance Every 10 to 15 hours of operation Hour Maintenance More frequently in dusty conditionsHour Maintenance Ponents is a fire hazard, and can Also damage your hearing Valve AdjustmentSpark Arrester Maintenance Never operate this unit With a damaged or missing mufflerEngine Break-In Carburetor AdjustmentAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Remedy Troubleshooting GuideSymptom Possible CauseYES Is the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page T16011001001/T16011999999 T15912001001/T15912999999 Servicing Information

X7506720300, GP344 specifications

The Shindaiwa X7506720300, GP344 is an advanced piece of outdoor power equipment that epitomizes durability and performance in gardening and landscaping tasks. Known for its robust construction and reliability, the GP344 is designed for both professional landscapers and the casual gardener who requires a machine that can perform under demanding conditions.

One of the standout features of the Shindaiwa GP344 is its powerful engine. Equipped with a high-performance 34.4cc two-stroke engine, it delivers impressive power while maintaining fuel efficiency. This engine design not only enhances performance but also reduces exhaust emissions, making it an environmentally friendly option for outdoor work.

The GP344 features Shindaiwa's proprietary Digi-Tach technology, which optimizes engine performance by automatically adjusting to the load conditions. This results in a seamless user experience, providing consistent power output whether you are tackling thick brush or delicate landscaping work. Additionally, the unit's low-vibration design minimizes fatigue during extended use, allowing operators to work more comfortably and efficiently.

Another key characteristic is the ergonomic design of the GP344. The unit is equipped with a comfortable handle and an adjustable harness that helps distribute weight evenly across the torso, allowing for better maneuverability. This attention to user comfort is essential for extended hours of operation, particularly in demanding landscaping applications.

Durability is a hallmark of Shindaiwa products, and the GP344 is no exception. Constructed with high-quality materials, the equipment is built to withstand the rigors of daily use. The metal guard and reinforced components provide added protection against wear and tear, ensuring that the unit remains operational for years with proper maintenance.

In terms of versatility, the Shindaiwa GP344 is compatible with various attachments, making it a multifunctional tool that can handle various tasks, from trimming and cutting to clearing heavy brush. This flexibility allows users to invest in one reliable piece of equipment rather than multiple specialized tools, ultimately saving time and money.

Overall, the Shindaiwa X7506720300, GP344 combines power, ergonomics, and durability, making it an ideal choice for landscapers and homeowners alike. With its innovative technologies and user-friendly features, the GP344 stands out as a reliable partner in lawn care and landscaping endeavors. Whether you are maintaining your garden or tackling larger commercial projects, the GP344 promises efficiency and long-lasting performance.
Top Page Image Contents