Shindaiwa X7506720300, GP344 manual 01/2010

Page 22

ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT

FOR ECHO AND SHINDAIWA BRANDS

The Environmental Protection Agency (EPA) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE). New equipment/SORE must be designed, built and equipped to meet stringent EPA and C.A.R.B. anti-smog standards. ECHO Inc. must warrant the emission control system on your equipment/SORE for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your equipment/ SORE. Your emission control system may include parts such as: carburetor, fuel-injection system, ignition system, catalytic converter/muffl er, fuel tank, fuel feed lines, fuel cap assembly, spark plug, air fi lters, and other associated components. Where a warrantable condition exists, ECHO Inc will repair your equipment/SORE at no cost to you including diagnosis, parts and labor. The Emission Control System warranty is extended to the original owner including all subsequent owners.

MANUFACTURER'S WARRANTY COVERAGE:

The emission control system is warranted for 2 years or the length of the ECHO Inc. warranty, whichever is longer. If any emission-related part on your equipment is defective, the part will be repaired or replaced by ECHO Inc. or its Authorized Service Representative.

OWNER'S WARRANTY RESPONSIBILITIES:

As the equipment/SORE owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. ECHO Inc. recommends that you retain all receipts covering maintenance on your equipment/SORE however, ECHO Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the equipment/SORE owner, you should be aware that ECHO Inc. may deny you warranty coverage if your equipment/SORE or a part has failed due to abuse, neglect, improper maintenance or unapproved modifi cations.

You are responsible for presenting your equipment/SORE to an ECHO Inc. authorized service representative as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If a warrantable condition exists and there is no Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM.

WHAT DOES THIS WARRANTY COVER?

ECHO Inc. warrants that your equipment/SORE was designed, built and equipped to conform with applicable EPA and C.A.R.B. emissions standards and that your equipment/SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc. warranty, whichever is longer. The warranty period begins on the date the product is purchased by an end user.

HOW WILL A COVERED PART BE CORRECTED?

If there is a defect in a part covered by this warranty, any ECHO Inc. Authorized Service Dealer will correct the defect. You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted.

WHAT PARTS ARE COVERED?

Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. The repaired or replaced part will be warranted for the remaining ECHO Inc. warranty period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc. warranty period.

Any emission related part scheduled for replacement during "required maintenance" is warranted for the period of time prior to the fi rst scheduled replacement point for that part. Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the fi rst scheduled replacement point for that part.

Any manufacturer-approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts, and must be provided without charge if the part is still under warranty.

Any replacement part that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the manufacturer.

Throughout the equipment/SORE warranty period, ECHO Inc. will maintain a supply of warranted parts suffi cient to meet the expected demand for such parts.

SPECIFIC EMISSION RELATED WARRANTED PARTS:

 

• Electronic Ignition System

• Spark Plug

• Catalytic Converter / Muffl er Assembly

• Carburetor (complete assembly or replaceable components)

• Choke

• Fuel-Injection Assembly (or replaceable components)

• Fuel Tank

• Fuel Cap Assembly

• Air Filter

• Fuel Feed Line (and associated clamps/connectors as applicable)

WHAT IS NOT COVERED?

Any failure caused by abuse, neglect, improper maintenance, unapproved modifi cations, use of unapproved add-on parts/modifi ed parts or unapproved accessories.

This Emission Control Warranty is valid only for the U.S.A., it's Territories, and Canada.

99922201033

 

01/2010

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents English Contents! Always wear eye and hearing protectionWhen operating this unit Minimize the risk of injury to yourself and othersIntroduction ContentsOperational and warning labels Safety Unit Description SpecificationsSpecifications are subject to change without notice Various components. UnderstandingInstall the Suction and Discharge Hoses AssemblyPrior to Assembly Emission Control Exhaust & EvaporativeMixing Fuel PrimingMixing Instructions Handling FuelFilling the fuel tank After useIf the engine does not start Starting the EnginePressing the primer bulb will not flood Engine with fuel Starting a Flooded EngineOperating Tips for Maximum Performance Stopping the EngineOperation Discharge Quantity liters per minuteMaintenance Hour Maintenance More frequently in dusty conditions 10/15-Hour Maintenance Every 10 to 15 hours of operationHour Maintenance Never operate this unit With a damaged or missing muffler Valve AdjustmentSpark Arrester Maintenance Ponents is a fire hazard, and can Also damage your hearingIdle Speed Adjustment Carburetor AdjustmentAdjusting Engine Idle Engine Break-InLong Term Storage Possible Cause Troubleshooting GuideSymptom RemedyYES Is the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Servicing Information T16011001001/T16011999999 T15912001001/T15912999999

X7506720300, GP344 specifications

The Shindaiwa X7506720300, GP344 is an advanced piece of outdoor power equipment that epitomizes durability and performance in gardening and landscaping tasks. Known for its robust construction and reliability, the GP344 is designed for both professional landscapers and the casual gardener who requires a machine that can perform under demanding conditions.

One of the standout features of the Shindaiwa GP344 is its powerful engine. Equipped with a high-performance 34.4cc two-stroke engine, it delivers impressive power while maintaining fuel efficiency. This engine design not only enhances performance but also reduces exhaust emissions, making it an environmentally friendly option for outdoor work.

The GP344 features Shindaiwa's proprietary Digi-Tach technology, which optimizes engine performance by automatically adjusting to the load conditions. This results in a seamless user experience, providing consistent power output whether you are tackling thick brush or delicate landscaping work. Additionally, the unit's low-vibration design minimizes fatigue during extended use, allowing operators to work more comfortably and efficiently.

Another key characteristic is the ergonomic design of the GP344. The unit is equipped with a comfortable handle and an adjustable harness that helps distribute weight evenly across the torso, allowing for better maneuverability. This attention to user comfort is essential for extended hours of operation, particularly in demanding landscaping applications.

Durability is a hallmark of Shindaiwa products, and the GP344 is no exception. Constructed with high-quality materials, the equipment is built to withstand the rigors of daily use. The metal guard and reinforced components provide added protection against wear and tear, ensuring that the unit remains operational for years with proper maintenance.

In terms of versatility, the Shindaiwa GP344 is compatible with various attachments, making it a multifunctional tool that can handle various tasks, from trimming and cutting to clearing heavy brush. This flexibility allows users to invest in one reliable piece of equipment rather than multiple specialized tools, ultimately saving time and money.

Overall, the Shindaiwa X7506720300, GP344 combines power, ergonomics, and durability, making it an ideal choice for landscapers and homeowners alike. With its innovative technologies and user-friendly features, the GP344 stands out as a reliable partner in lawn care and landscaping endeavors. Whether you are maintaining your garden or tackling larger commercial projects, the GP344 promises efficiency and long-lasting performance.
Top Page Image Contents