Shindaiwa X7502235300, PB270 manual Filling the fuel tank, Minimize the Risk of Fire

Page 10

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut- off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immedi- ately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PB270 Powerbroom Contents IntroductionWork Safely SafetySafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionConnect the Outer Tube to the Powerhead AssemblyPrior to assembly Throttle Cable and Ignition LeadsAdjustable Handle Installation Throttle lever free playSweeper Assembly Mixing Fuel Fuel RequirementsFilling the fuel tank Minimize the Risk of FireWhen the Engine Starts Starting the EngineStopping the Engine Adjusting Engine IdleIdle Speed Adjustment Checking Unit ConditionBreak-in and Operation Optional accessoriesOperating Operating TechniquesMaintenance 10/15-Hour Maintenance Remove and clean or replace the spark plugGearcase Lubrication Muffler Maintenance Long Term StorageTroubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions 99922201031 02/05/2010 01/2010 Page Page Page Page Servicing Information Parts/Serial Number

PB270, X7502235300 specifications

The Shindaiwa X7502235300, also known as the PB270, is a robust and versatile backpack blower tailored for both professional landscapers and homeowners seeking efficiency in outdoor maintenance. This model is engineered to handle a wide range of tasks, from clearing leaves and debris to maintaining garden aesthetics.

One of the standout features of the PB270 is its powerful engine, which boasts a displacement of 25.4cc. This 2-stroke engine is designed to deliver high performance with low emissions, making it both environmentally friendly and compliant with stringent regulations. The blower's exceptional fuel efficiency ensures longer operational times, allowing users to tackle larger areas without frequent refueling.

In addition to its impressive power, the PB270 is equipped with a lightweight design that significantly enhances user comfort during extended use. Weighing in at just over 10 pounds, it incorporates adjustable padded shoulder straps and a cushioned back panel, reducing fatigue and improving user experience. The ergonomic layout ensures that the weight is evenly distributed, enabling users to maneuver easily while navigating tight spaces.

The X7502235300 features a unique jet fan technology that generates a high-speed airflow of up to 150 miles per hour. This innovative design maximizes air volume and velocity, allowing users to effortlessly clear leaves, grass clippings, and debris from driveways, sidewalks, and gardens. The variable speed control further enhances versatility, letting users adjust the airflow to suit the specific task at hand.

Additionally, Shindaiwa emphasizes ease of use in the PB270 with its simplified starting system. The easy-start technology minimizes rope resistance, ensuring quick and reliable starts even in cold conditions. Maintenance is user-friendly as well, featuring a tool-less air filter access and a removable spark plug for quick servicing.

Durability is another significant characteristic of the PB270. It is constructed with high-quality materials designed to withstand harsh outdoor conditions, ensuring longevity and dependable performance. The product is backed by Shindaiwa's reputation for excellence, making it a trusted choice for those seeking a reliable backpack blower.

In summary, the Shindaiwa X7502235300, PB270 brings together power, efficiency, and user-friendly features in a compact design. With its potent engine, innovative technology, and ergonomic considerations, it stands as an excellent option for both professional landscapers and homeowners looking to maintain their outdoor spaces effectively.
Top Page Image Contents